FS Parts: Working Popeye PCB - $90 shipped

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
Rating - 100%
24   0   0
Tested working 100%. Came out of a cocktail and is currently set for the cocktail, but can be changed for upright by moving one dip switch. Currently set to free play but you can change that via dip switch, too.

2-board stack. Was being run via edge connector. Comes with interboard power rainbow cable.

PM if interested.

Here are pics of it running:

SDC12627.jpg


SDC12628.jpg


SDC12629.jpg
 
60-in-1.

:D

Seriously. My boss got it and is converting it for the customer. I'm saving what I can for those who may need it.

I have a wiring harness for the cocktail now, too. Everything except the control panel wiring, the short section that goes from the harness to the monitor, and any coin door stuff. Basically the edge connector, and all the wiring that goes to the connectors for the coin door, monitor, power supply, and control panels. If you're interested, make me an offer.


And I also have a fully working PT-700A power supply from it. Tested working in the game. +5 and +24 reading spot on. Make an offer...
 
Back
Top Bottom