Working on Bally pins with PF's that rotate/lift up instead of pull out

GameyMcGame

Well-known member
Joined
Sep 14, 2007
Messages
12,552
Reaction score
790
Location
CRAZYTOWN, Massachusetts
Working on Bally pins with PF's that rotate/lift up instead of pull out

The fixed pivot point playfield on my Taf makes working on some areas of the PF underside pretty hard.

I'm assuming I'm missing something but what is it? Any suggestions?
 
That is about it.

You can remove the balls and tilt the playfield the whole way back until it rests on the head.

The only other option is to lift the playfield up and out of the game. Way out and you have to unplug all the playfield connectors from the head.

LTG : )
 
That is about it.

You can remove the balls and tilt the playfield the whole way back until it rests on the head.

The only other option is to lift the playfield up and out of the game. Way out and you have to unplug all the playfield connectors from the head.

LTG : )

Thanks. Man, what a pain.
 
Back
Top Bottom