FS Parts: Working Magic Sword B/C board, bad A board

The_Director

Active member
Joined
Jun 11, 2013
Messages
132
Reaction score
73
Location
North Carolina
Rating - 100%
2   0   0
I tested the B/C board on a working A board and it was good, so the issues are definitely on the A board. It boots with heavy graphic issues. Will play a game, sound works.

$140 shipped
 

Attachments

  • IMG_2968.jpeg
    IMG_2968.jpeg
    2.7 MB · Views: 16
  • IMG_2969.jpeg
    IMG_2969.jpeg
    2.4 MB · Views: 14
  • IMG_2970.jpeg
    IMG_2970.jpeg
    2.5 MB · Views: 14
Likely an issue with the A custom. You might want to reflow the legs:

1701304047062.png

A couple of these look suspect.
 
I hit it with some flux and hot air with no change the other day. I'll give it another go, can't hurt anything. I'm afraid the PPU is shot though on this one. Seems a common failure and this one has as bad of graphics glitching as I've seen.
 
Back
Top Bottom