processedmeat
Active member
Hi all, fully functional APB, no seat but with working flashing siren lights.
The 19" med res monitor has some significant APB burn in but has been recapped with a Ian Kellogg cap kit. I also have had a hard time making the image fill the entire screen. There is about a 3/4" black strip at the top of the image as seen in the attached photo. The cabinet shows your typical wear and tear around the edges, a few holes where the coin door bars were located, the t-molding needs to be replaced, and sideart has scratches. The siren light marquee is in good shape except for a cigarette burn on the underside of it but I was able to fix the flashing light functionality of it.
The attached photo shows the before and after I capped the monitor and adjusted the horizonal width caps.
The 19" med res monitor has some significant APB burn in but has been recapped with a Ian Kellogg cap kit. I also have had a hard time making the image fill the entire screen. There is about a 3/4" black strip at the top of the image as seen in the attached photo. The cabinet shows your typical wear and tear around the edges, a few holes where the coin door bars were located, the t-molding needs to be replaced, and sideart has scratches. The siren light marquee is in good shape except for a cigarette burn on the underside of it but I was able to fix the flashing light functionality of it.
The attached photo shows the before and after I capped the monitor and adjusted the horizonal width caps.
Attachments
Last edited:

