wiring question

silvereagle

Well-known member
Joined
May 28, 2007
Messages
2,900
Reaction score
499
Location
Innisfil, ON, Canada
Hey guys,

I recently purchased a jamma harness from jamma boards and upon re-wiring my cab, I noticed there was no 12v or ground wire to light up the coin door reject buttons. My question is, would it be okay to take power and ground from the switcher or will this pose a problem? Same thing with my marquee, I decided to use an LED setup that runs on 12v and I would need to connect it the same way as the coin door. Just want to make sure this is okay.

Thanks
 
Back
Top Bottom