Wiring and CP Question.

noice87

Well-known member
Joined
Mar 25, 2002
Messages
12,238
Reaction score
115
Location
Glenn Heights, Texas
I bought a Cherry Master with the intent of keeping th 13" monitor and scrapping the rest. But I have decided to put it on CL and sell it. It appears to never have been finished nor ever used as the stats on the PCB showed all zeros.

The question I have is there are 3 buttons wired up but there needs to be 3 more. The switches for them are wired and next to each other under the Control Panel. I am going to wire them to the exisiting buttons so each button will have two functions. I know how to tie in the 3 wires but do I need to tie in another ground wire? Each button already has one so I don't think I need another one.

The second question is what is the best way to label the buttons. Ie the buttons from right to left will be "Add Credits - Low" "Spin - Take" "Double Up - High" I was thinking either stickers or some nail pollish above and below the buttons as the CP is black. Doesn't need to be great just enough to look ok for CL.

Thanks Steven
 
Nail polish? hell no!

Just wire the hots to the same side and use the same ground.

As for your buttons, if they are backlit, you can pop the tops off and replace the insert with custom-printed ones. otherwise, print some decent-looking stickers and apply them...
 
Back
Top Bottom