Wiring a Wells Gardner monitor to a Midway or JAMMA harness

elekTRONarcade

Active member
Joined
Aug 2, 2011
Messages
1,346
Reaction score
24
Location
Milton, Florida
Wiring a Wells Gardner monitor to a Midway or JAMMA harness

Not sure if I titled this post correctly, but here's the situation: I have a game whose harness has the red two post half-circle shaped male connector (dunno what the technical term for this type of connector is). The monitor died, and I have one of those Wells Gardner monitors that have the white female plug with the half-circle and full circle shaped keyholes. From what I've gathered, these types of WG monitors require isolation transformers. How do I go about rigging this monitor into my cab? Here's a few pics of the ends I'm talking about:

attachment.php


attachment.php
 

Attachments

  • 100_1720.JPG
    100_1720.JPG
    94.5 KB · Views: 47
  • 100_1724.jpg
    100_1724.jpg
    19.6 KB · Views: 48
i'm confused does this new cabinet not have an iso transformer ? If so I have " rigged " a few to work by cutting the wires and splicing them together till I could get the proper connectors. The type of connector in your picture is usually referred to as a Molex connector which can be purchased here:
http://www.twistedquarter.com/index...t=20a&page=1&zenid=gaei50eiespgu15iq37kbcj4f7

Hope that helps, I'm not good with the monitors but there are some real experts on here that will probably have a better solution for you.
 
The first connector is an "Amp" .084 and the second is a "Molex" .093. The Amp connectors can still be found, but the standard now is the Molex.
 
Back
Top Bottom