jcterzin New member VAPS Joined Dec 29, 2009 Messages 501 Reaction score 1 Location Richmond, Indiana Feb 15, 2011 #1 How do I wire a test switch (momentary) from a Jamma harness?
cleverlyj Well-known member Donor 2011 VAPS Joined Aug 6, 2003 Messages 14,653 Reaction score 513 Location Northglenn, Colorado Feb 15, 2011 #2 get something like a small pushbutton, like this midway cocktail start button - , and wire one side to test, and the other to your ground loop. what i did on my multi williams was using the advance/test switches that are on the williams coin door, i just wired one to test and one to service.
get something like a small pushbutton, like this midway cocktail start button - , and wire one side to test, and the other to your ground loop. what i did on my multi williams was using the advance/test switches that are on the williams coin door, i just wired one to test and one to service.
OP OP jcterzin New member VAPS Joined Dec 29, 2009 Messages 501 Reaction score 1 Location Richmond, Indiana Feb 15, 2011 #3 sounds good, but that pic has three prongs you show...
oppolo Well-known member Joined Apr 23, 2009 Messages 1,537 Reaction score 164 Location Illinois Feb 15, 2011 #4 1 Common Before pressing button.... 2 Normally Open 3 Normally Closed