Williams "The Getaway" Pinball - Ball Missing Message

lmsrick

Member

Donor 2012
Joined
Nov 11, 2012
Messages
49
Reaction score
0
Location
Canton, Michigan
Williams "The Getaway" Pinball - Ball Missing Message

Just recently my Getaway pinball has been flashing a message saying Ball Missing. I checked and all 3 balls are inside. Any ideas?

Thank you

Rick
 
First thing I would do is go to the switch test and switch edge test and make sure the switches are registering. If not, check the wires and the connectors. Start with the easy things first.
 
All of the switch test and switch edge tests are good. There doesn't appear to be any loose connections. I'm stumped.

Rick
 
Did you check that the trough switches are registering when the balls are present?

X2 This is usually what causes this. One of the switches in the trough may register when you push it down with your finger but not with the ball and just may need some tweaking. Try with you finger on all then again with your balls (DOH!). Just went through a similar issue with one of my games.
 
Back
Top Bottom