Williams Space Shuttle player 3 display problem

20eyes

New member
Joined
Dec 23, 2005
Messages
432
Reaction score
4
Location
Sturgeon Bay, Wisconsin
My player 3 display is not working. I swapped ribbon cables and tried it on the other players and its still dead. I got one other display working by reflowing the solder joints. Are these prone to just failing or is there some sort of component to replace. I just don't want to waste money replacing it if somthing else could be the problem. Thanks.
 
My player 3 display is not working. I swapped ribbon cables and tried it on the other players and its still dead. I got one other display working by reflowing the solder joints. Are these prone to just failing or is there some sort of component to replace. I just don't want to waste money replacing it if somthing else could be the problem. Thanks.

Swap one of the other working displays in place of the non-working one. That will rule out if it is a bad display or not.
 
Ok, im an idiot... I plugged player 3 into another display and it came up so the display itself is dead. I take it there is no way to fix them since there is nothing else on the board besides the display itself.
 
Last edited:
Back
Top Bottom