Williams Multigame Bezels
- Thread starter Tanman
- Start date
Plexi I assume? What's the thickness?
rockin_rick
Member
That's only going to get you bad ratings on your shipping cost stars. And if that falls below a certain amount (IIRC 4.1), then you will be banned from ebay for a certain amount of time.
Probably also in violation of excessive shipping cost rules / fee avoidance rules.
Don't get me wrong, I'm not bitching. Just hope you don't get any bad repercussions from this.
Rick
Probably also in violation of excessive shipping cost rules / fee avoidance rules.
Don't get me wrong, I'm not bitching. Just hope you don't get any bad repercussions from this.
Rick
Last edited:
rockin_rick
Member
oh, and here's a link for those interested -
http://cgi.ebay.com/Williams-Multig...286.c0.m14&_trkparms=66:2|65:10|39:1|240:1318
Rick
http://cgi.ebay.com/Williams-Multig...286.c0.m14&_trkparms=66:2|65:10|39:1|240:1318
Rick
OP
OP
Tanman
Member
I still have a some more single Bezels for 65.00 Shipped. I will be saving most for the
CPO, Marquee & Bezel Combo. ETA first week of April. You can PM me for Paypal info
or I might have one listed on Epay if you prefer.
Thanks.
CPO, Marquee & Bezel Combo. ETA first week of April. You can PM me for Paypal info
or I might have one listed on Epay if you prefer.
Thanks.
OP
OP
Tanman
Member
I still have you on the list along with others from PM's & emails waiting for
"The Combo Deal". I won't forget you Guys!
falcon
New member
CPO, Marquee & Bezel Combo
put me on the list for the CPO, Marquee & Bezel Combo deal. i will be getting a stargate cab at end of march and i assuming that evrything is the correct size for it.
or do i need to PM you to get on that list?
-Pat
put me on the list for the CPO, Marquee & Bezel Combo deal. i will be getting a stargate cab at end of march and i assuming that evrything is the correct size for it.
or do i need to PM you to get on that list?
-Pat
OP
OP
Tanman
Member
The art will fit a Stargate cabinet but the marquee should be 7 1/4 inches high compared
to 7 1/2.
Just let me know what cabinet you are using when ordering so I can cut it so size.
OP
OP
Tanman
Member
A few people want the Bezels trimmed to fit other Williams Cabinets.
Here is a tape measure to show what art would have to be cut.
Moon Patrol is 22 7/8 wide so ¾ off each side would have to be trimmed.
gatordad
Well-known member
Tan man I quoted you from another thread talking about your project,
What does that mean exactly,
Don't get me wrong, I am not in any rush, and don't mind waiting at all, I understand what life is like and this is a hobby etc etc.
just one question, is this going to happen eventually with the marquee and cpo or has it been put on hold indefinitely?
OP
OP
Tanman
Member
I have 3 colors done on the Marquees. The machine broke down so I was unable to complete them. Right now it's working again but I have to slide them in when the shop has some downtime.
The demand for the MW art is pretty sad and the CPO material alone is over 1000 bucks not including 12 or 14 colors, burning the screens, cleaning the screens etc, etc.
For the 15 or so people that want one I really don't think it's going to happen unless more people show interest.
T
The demand for the MW art is pretty sad and the CPO material alone is over 1000 bucks not including 12 or 14 colors, burning the screens, cleaning the screens etc, etc.
For the 15 or so people that want one I really don't think it's going to happen unless more people show interest.
T
Last edited:
