Williams Leaf button replacement size...

modessitt

Volunteer: Encyclopedia Submission Moderator
Joined
Mar 22, 2007
Messages
33,414
Reaction score
325
Location
Austin, Texas
BobRob and others indicate that the wood panels are the "short" leafs. I guess this means the 1-1/8" shafts? The ones I pulled off of my Moon Patrol are measuring 1-3/8" from the bottom of the lip to the end that contacts the switch. I need to get some new buttons (2 red, 2 yellow, 2 white) and want to make sure I get the right size. Dunno if 1-3/8 is considered "short" for arcade (the 1-1/8 were on a pinball site) or long...
 
BobRob and others indicate that the wood panels are the "short" leafs. I guess this means the 1-1/8" shafts? The ones I pulled off of my Moon Patrol are measuring 1-3/8" from the bottom of the lip to the end that contacts the switch. I need to get some new buttons (2 red, 2 yellow, 2 white) and want to make sure I get the right size. Dunno if 1-3/8 is considered "short" for arcade (the 1-1/8 were on a pinball site) or long...


Yes, the one's BobRob sells as "short" are the correct length for Williams C panels.
 
Back
Top Bottom