Williams Indiana Jones lighting issue

KingOfTron

Member
Joined
May 13, 2009
Messages
415
Reaction score
7
Location
Arizona
A couple weeks ago the bulbs under each pop bumber and the 3 bulbs seperating the INDY rollovers (the ones in the dividers) in the back of the playfield went out at the same time. I got around to opening it up yesterday and found a wire that had become somewhat unattached, and soldered it back on. It didn't fix it. Nothing looks odd and everythings is attached pretty firmly down there. Anyone know what might be keeping these lights off?
 
Just a suggestion, but check all of the fuses for the GI. When the wire broke it might have touched something, causing the fuse to blow.
-Mark
 
I changed out the five GI fuses last night, but unfortunately nothing happened. I didn't realize it earlier, but the GI lights on the Path of Adventure are also out. I went into the test mode and narrowed the problem down to the strand of lights belonging to the white-brown grouping. All the other groups tested fine, the white-brown didn't light anything. Anyone know if there's something causing this fuse to instantly blow?
 
Have you checked the GI connectors on the driver board?

Is this the piece that has the various colored wires attached to it? What should I be looking for? I'll take a picture of the board this afternoon if it'll help.
 
Back
Top Bottom