Williams EM, rejector locking plates needed -

dasvis

Member
Joined
Jul 28, 2010
Messages
261
Reaction score
0
Location
Salem, Oregon
1977 Williams Aztec, I am looking for two of the 1A-4243 coin rejector (or coin mech) locking plates. This is the part that screws directly onto the top two screw holes of the coin mech & locks it in place. Without these I am dead in the water.
Actually, I could use two quarter coin mechs too if you have any with the lock plates still screwed onto them....

PBR suprisingly has none..... ?

UPDATE - John's Jukes saved the day! Looking forward to stopping in @ his shop next trip up North.
 
Last edited:
Back
Top Bottom