FS Game: Williams Cyclone Project in Reno NV

TheDrewster

Well-known member

Donor 2012
Joined
Oct 5, 2008
Messages
7,668
Reaction score
314
Location
Reno, Nevada
Rating - 100%
112   0   0
Just pulled this out of my storage unit and it is WAY too deep of a project for me at this time. I'll be as thorough as I can in it's condition. The ramps are shot but included. The MPU, sound board, lockdown bar, flipper bats, and keys are missing. There is a patch job on the front of the cabinet and some heavy wear on the drop down lanes. The backglass has been replaced with plexi. Legs are included but also a little rough.

On the plus side, nothing proprietary is missing and this machine can easily be rebuilt with time and patience. Will make a fantastic players machine when all is said and done. I will NOT part this machine out, so please don't ask to just buy the raised letter coin door, haha. Eventually I will get around to rebuilding this machine but I wanted to offer it up to anyone who may have more time and storage space than I do.

Asking $1000.

81475b17595ab61ee0850ca207c74003.jpg

6308a388dce38832a0b58c3fdfd53361.jpg

8927b9e8556f83fd3046b5c7006b5cf3.jpg

58ad88a746c72ee3def0a6102e1a3309.jpg

fbe26b3db20641788342f544c4ee9664.jpg
 
Not bad. The ramps were repro'd a few years ago, not sure if they are still available.

The drop down lanes always seem to be worn on this game. I know mine has some.

Is the mylar still on the playfield?
 
Back
Top Bottom