Williams coin door help! where does this go?

gatordad

Well-known member
Joined
Aug 29, 2007
Messages
1,853
Reaction score
79
Location
Illinois
Sorry meant to say Midway coin door, and I can't change the title of the post

Ok........ I didn't take any pictures before I tore it apart, :mad:

I have no idea where this goes

This is from an older style Midway coin door, anyone have an idea how this goes on the coin door and where, I have a feeling it goes under the coin mech, but it's too big and does not fit , hmmmm

any help would be aprieciated a picture would be best if anyone knows
Thanks Much
 

Attachments

  • IMGP0890.jpg
    IMGP0890.jpg
    82.5 KB · Views: 33
Last edited:
Looks like the part at the bottom next to the coin return slots.

coin-door-new-populated-small-02012010.jpg
 
The two screws that go through the coin switch hold that piece up as well on my machine.

Sorry for the blurry pic.
 

Attachments

  • midway coin switch.jpg
    midway coin switch.jpg
    86.3 KB · Views: 10
It is definitely a coin guide or microswitch guide but both pic's do not contain the same part as the one I posted,
I'm still confused, this is wider than the ones I see in the 2 photo's you guys posted
Thanks for the quick replys
still looking for an answer
 
No :confused:

I have 2 other ones to use as guides but this part is different than anything on the other 2

The location should be the same. The orientation is probably the same which is flipped from how you showed the picture. You might post the picture of the door or check the manual for the game the door came from. Should be like a puzzle piece you know where it goes, but need to spin it around until it fits. :)
 
Here are some of the pic's I did take
You can see the part and how wide it is on top and in front of the door in the first 2 pic's
 

Attachments

  • IMGP0896.jpg
    IMGP0896.jpg
    94.4 KB · Views: 5
  • IMGP0898.jpg
    IMGP0898.jpg
    95.5 KB · Views: 9
  • IMGP0892.jpg
    IMGP0892.jpg
    96.9 KB · Views: 3
  • IMGP0886.jpg
    IMGP0886.jpg
    94.6 KB · Views: 4
Here are some of the pic's I did take
You can see the part and how wide it is on top and in front of the door in the first 2 pic's

That doesn't look like it is for that coin door. I was thinking you had a different revision or something, but that just looks like the similar door to what we posted and that part doesn't belong. I'm going to search to see what type of door that goes too.
 
Back
Top Bottom