Williams Bonanza Long post
Please read the entire post.
I have the following parts for sale. Prices are fixed. Whatever doesn't sell will be marked down in later rounds. Everything sold as-is. Shipping will be actual shipping either by Priority mail or UPS/Fed-Ex ground. All shipping to Canada will be by UPS or USPS with insurance. No exceptions. Sorry, I keep getting things lost. I will note however that the last package I sent up North made it there. Finally!!!!
I purchased these parts from a fellow collector who needed to move them. I have no desire to hold on to this stuff and would like to move it quickly. I've put low prices on everything (at least I think they are) in order to move them. I WILL NOT give out shipping quotes. You either want the stuff or you don't. You've been collecting long enough to know that shipping is going to run on average $10-$12 for a CPU size package and power bricks can be anywhere from $15-30. I will combine items to save your bucks on shipping. I will not put a power brick with a CPU, fair enough? Local pickup is always free and preferred. I'm in Flower Mound which is North of the DFW airport. (Dallas)
I'm not trying to get rich guys. Just need space and don't want to pitch this stuff in the dump. Some items may be misfiled under certain categories. I assume you know what you are buying. If something is marked as a sound board but is indeed a "gonkulator", then you will purchase a sound board but get a "gonkulator". Most everything is tagged so be sure to ask for an item by it's number. If I didn't put a number on it, my bad. Just look at the photos and it should be obvious which one is number one or two.
Okay, that's the meat of it. Here is how I'd like to do it. Respond to this post saying something like "PM with address and phone number and e-mail address sent for Power brick 2 and CPU 2 and 3." That way anybody that comes after you knows those items are indeed spoken for.
First come, first served. Then, be sure to shoot me a PM with your shipping address and a repeat of the items you want to purchase. If you prefer a certain method of shipping, be sure to specify it in your PM. I shall package them up and shoot you a total. paypal only please. Be sure to use the title I used for the item so that I don't send you a power brick instead of a power supply.
My paypal address is: [email protected]
That also happens to be my e-mail. Finally, I am out of country A LOT !!! Shipping this stuff may take a little while but I will do all that I can to get it out of here as quickly as possible. This stuff filled up the back of my pickup truck. Please don't ask if I have such and such. As I find more stuff, I'll post it in a separate post. Don't forget to include your phone numbers and e-mail addresses so that I can send tracking info. (Fed-Ex wants your phone as does UPS I think)
Okay, here is the list:
Williams Power Bricks:
$10 each except number 6. Number 6 is completely rebuilt and is $40 Number 5 and number 2 have new power cords.
Please note number 4 is actually from a Frogger (I think) and is only $5 and number 8 is for an Atari System 1 or 2 or maybe a Hard Drivin. I don't know . It too is $5
Photos here: http://picasaweb.google.com/pat.danis/WilliamsPowerBricks?feat=directlink
Williams Power supplies:
$7 each I think I have about 15 more of these in a box. If you want them let me know. Update #5 and #6 sold
Photos: http://picasaweb.google.com/pat.danis/WilliamsPS?feat=directlink
Williams Speaker Panels:
#1-3 $25
#M5 $5
Photos: http://picasaweb.google.com/pat.danis/WilliamsSpeaker?feat=directlink
Wizard of WOR stuff: Update.....Sold all of it
2 cages of boards and one sound card thingy $50
Photos: http://picasaweb.google.com/pat.danis/Wizard?feat=directlink
Williams Converters: Update Sold number 5 and Number 10
$5 each except number 10 which is completely rebuilt and loaded with fuses. It is $15
Photos: http://picasaweb.google.com/pat.danis/WilliamsConverter?feat=directlink
Williams Plates:
Various backing plates $15 each for 1-3, $5 each for number 4 and 5
Photos: http://picasaweb.google.com/pat.danis/WilliamsPlates?feat=directlink
Williams coin doors:
Coin doors 1 and 2 go together with the backing plates at the end of the album They are one item in themselves. That is, 4 pieces, one money. Coin doors $5 except number 5 which is $10.
Photos: http://picasaweb.google.com/pat.danis/WilliamsCoinDoors?feat=directlink
Williams Panels: $20 each
Number 1 is really a Dynamo 25" cut corner cabinet panel NOS with cracked plexi covering
Number 2 is converted Defender I think
Number 3 is unknown
Number 4 is Omega Race (Rare Williams release........................I'm kidding, I'm kidding)
Number 5 are 48 way joysticks untested
Photos: http://picasaweb.google.com/pat.danis/WilliamsPanels?feat=directlink
Williams Rom boards Update Sold #8
Note some are missing a rom or 2 and are grouped together for that reason. Some are stripped. As-is
$15 each item
Photos: http://picasaweb.google.com/pat.danis/WilliamsROM?feat=directlink
Williams sound boards: Update Sold number 2, #10
$9 each
Photos: http://picasaweb.google.com/pat.danis/WilliamsSound?feat=directlink
Williams CPU:
#1 and # 2 $10@
#3 and #4 have new RAM $18@
#5 Early model Defender CPU with new RAM? $25
#6 Joust on backing plate (told it works) $65
#7 New RAM? $18
#8 Moon Patrol in a static bag $40
#9 Quartet 2 works $25
#A Hogans Alley with 2 bad ROMS (marked with tape) $10
#B Hogan's Alley fully working $20
Photos: http://picasaweb.google.com/pat.danis/WilliamsCPU?feat=directlink
Williams Wiring: Update Sold #2 and number 3
This is a bit messy but the prices are right. $5
The first 2 have been cut but would work great for repairs.
#1 is from a Joust I believe (mostly there)
#2 Defender (mostly there)
#3 AC harness
#4 power brick portion (good for repairs)
#5 AC harness
#6 grounding braid
Photos: http://picasaweb.google.com/pat.danis/WilliamsWiring?feat=directlink
Miscellaneous bits Update Sold M3 and M4
#M1 $20 includes a williams branded coin mech
#M2 $5
#M3 $10
#M4 $12 Those are sinsitar boards I think
#M5 Crime city stuff The bezel is stiff cardboard that is cut.$10
#M6 Defender $15
#M7 $5 Champion edition marquee
Photos: http://picasaweb.google.com/pat.danis/WilliamsMisc?feat=directlink
Yes, this took almost 2 hours to organize and post. That's why no shipping quotes. I'm going to work on arcades now. Ken (YellowDog) took a look at my photos and posted this to me:
Just as a heads up, M4 is the mounting plate and rails for a Stargate power supply board. The two small PCBs are the semi-mythical Stargate overvoltage boards added to Stargate power supplies as add ons before they were incorporated into the ps board design for Robotron.
The Defender control just has a Willis overlay on it. It looks complete.
The Crime City control panel looks to be a converted Robotron cp
Thanks to Ken for that info. Good luck guys/gals.
Please read the entire post.
I have the following parts for sale. Prices are fixed. Whatever doesn't sell will be marked down in later rounds. Everything sold as-is. Shipping will be actual shipping either by Priority mail or UPS/Fed-Ex ground. All shipping to Canada will be by UPS or USPS with insurance. No exceptions. Sorry, I keep getting things lost. I will note however that the last package I sent up North made it there. Finally!!!!
I purchased these parts from a fellow collector who needed to move them. I have no desire to hold on to this stuff and would like to move it quickly. I've put low prices on everything (at least I think they are) in order to move them. I WILL NOT give out shipping quotes. You either want the stuff or you don't. You've been collecting long enough to know that shipping is going to run on average $10-$12 for a CPU size package and power bricks can be anywhere from $15-30. I will combine items to save your bucks on shipping. I will not put a power brick with a CPU, fair enough? Local pickup is always free and preferred. I'm in Flower Mound which is North of the DFW airport. (Dallas)
I'm not trying to get rich guys. Just need space and don't want to pitch this stuff in the dump. Some items may be misfiled under certain categories. I assume you know what you are buying. If something is marked as a sound board but is indeed a "gonkulator", then you will purchase a sound board but get a "gonkulator". Most everything is tagged so be sure to ask for an item by it's number. If I didn't put a number on it, my bad. Just look at the photos and it should be obvious which one is number one or two.
Okay, that's the meat of it. Here is how I'd like to do it. Respond to this post saying something like "PM with address and phone number and e-mail address sent for Power brick 2 and CPU 2 and 3." That way anybody that comes after you knows those items are indeed spoken for.
First come, first served. Then, be sure to shoot me a PM with your shipping address and a repeat of the items you want to purchase. If you prefer a certain method of shipping, be sure to specify it in your PM. I shall package them up and shoot you a total. paypal only please. Be sure to use the title I used for the item so that I don't send you a power brick instead of a power supply.
My paypal address is: [email protected]
That also happens to be my e-mail. Finally, I am out of country A LOT !!! Shipping this stuff may take a little while but I will do all that I can to get it out of here as quickly as possible. This stuff filled up the back of my pickup truck. Please don't ask if I have such and such. As I find more stuff, I'll post it in a separate post. Don't forget to include your phone numbers and e-mail addresses so that I can send tracking info. (Fed-Ex wants your phone as does UPS I think)
Okay, here is the list:
Williams Power Bricks:
$10 each except number 6. Number 6 is completely rebuilt and is $40 Number 5 and number 2 have new power cords.
Please note number 4 is actually from a Frogger (I think) and is only $5 and number 8 is for an Atari System 1 or 2 or maybe a Hard Drivin. I don't know . It too is $5
Photos here: http://picasaweb.google.com/pat.danis/WilliamsPowerBricks?feat=directlink
Williams Power supplies:
$7 each I think I have about 15 more of these in a box. If you want them let me know. Update #5 and #6 sold
Photos: http://picasaweb.google.com/pat.danis/WilliamsPS?feat=directlink
Williams Speaker Panels:
#1-3 $25
#M5 $5
Photos: http://picasaweb.google.com/pat.danis/WilliamsSpeaker?feat=directlink
Wizard of WOR stuff: Update.....Sold all of it
2 cages of boards and one sound card thingy $50
Photos: http://picasaweb.google.com/pat.danis/Wizard?feat=directlink
Williams Converters: Update Sold number 5 and Number 10
$5 each except number 10 which is completely rebuilt and loaded with fuses. It is $15
Photos: http://picasaweb.google.com/pat.danis/WilliamsConverter?feat=directlink
Williams Plates:
Various backing plates $15 each for 1-3, $5 each for number 4 and 5
Photos: http://picasaweb.google.com/pat.danis/WilliamsPlates?feat=directlink
Williams coin doors:
Coin doors 1 and 2 go together with the backing plates at the end of the album They are one item in themselves. That is, 4 pieces, one money. Coin doors $5 except number 5 which is $10.
Photos: http://picasaweb.google.com/pat.danis/WilliamsCoinDoors?feat=directlink
Williams Panels: $20 each
Number 1 is really a Dynamo 25" cut corner cabinet panel NOS with cracked plexi covering
Number 2 is converted Defender I think
Number 3 is unknown
Number 4 is Omega Race (Rare Williams release........................I'm kidding, I'm kidding)
Number 5 are 48 way joysticks untested
Photos: http://picasaweb.google.com/pat.danis/WilliamsPanels?feat=directlink
Williams Rom boards Update Sold #8
Note some are missing a rom or 2 and are grouped together for that reason. Some are stripped. As-is
$15 each item
Photos: http://picasaweb.google.com/pat.danis/WilliamsROM?feat=directlink
Williams sound boards: Update Sold number 2, #10
$9 each
Photos: http://picasaweb.google.com/pat.danis/WilliamsSound?feat=directlink
Williams CPU:
#1 and # 2 $10@
#3 and #4 have new RAM $18@
#5 Early model Defender CPU with new RAM? $25
#6 Joust on backing plate (told it works) $65
#7 New RAM? $18
#8 Moon Patrol in a static bag $40
#9 Quartet 2 works $25
#A Hogans Alley with 2 bad ROMS (marked with tape) $10
#B Hogan's Alley fully working $20
Photos: http://picasaweb.google.com/pat.danis/WilliamsCPU?feat=directlink
Williams Wiring: Update Sold #2 and number 3
This is a bit messy but the prices are right. $5
The first 2 have been cut but would work great for repairs.
#1 is from a Joust I believe (mostly there)
#2 Defender (mostly there)
#3 AC harness
#4 power brick portion (good for repairs)
#5 AC harness
#6 grounding braid
Photos: http://picasaweb.google.com/pat.danis/WilliamsWiring?feat=directlink
Miscellaneous bits Update Sold M3 and M4
#M1 $20 includes a williams branded coin mech
#M2 $5
#M3 $10
#M4 $12 Those are sinsitar boards I think
#M5 Crime city stuff The bezel is stiff cardboard that is cut.$10
#M6 Defender $15
#M7 $5 Champion edition marquee
Photos: http://picasaweb.google.com/pat.danis/WilliamsMisc?feat=directlink
Yes, this took almost 2 hours to organize and post. That's why no shipping quotes. I'm going to work on arcades now. Ken (YellowDog) took a look at my photos and posted this to me:
Just as a heads up, M4 is the mounting plate and rails for a Stargate power supply board. The two small PCBs are the semi-mythical Stargate overvoltage boards added to Stargate power supplies as add ons before they were incorporated into the ps board design for Robotron.
The Defender control just has a Willis overlay on it. It looks complete.
The Crime City control panel looks to be a converted Robotron cp
Thanks to Ken for that info. Good luck guys/gals.
Last edited:

