Will this tube work in a swap?

joemagiera

Thread Manager
Joined
Mar 22, 2003
Messages
6,162
Reaction score
1,073
Would this tube work as a tube swap donor for a G07, 46xx, 49xx, 7xxx?

It's from a Hantarex MTC900. You can see pictures here:
http://forums.arcade-museum.com/showthread.php?t=184904

The manaul is here:
http://thearcadeboneyard.com/Monitor_Manuals/Hantarex_MTC900.pdf
Look at the neck board on page 7, it's the top one, the HFB S41. The pin configuration doesn't look good, but I don't know.

Can't find any labels on the tube, but in raised letters on the tube it has:
F
19V90 0T (can't tell if the character before the "T" is a 0 (zero) or an O (letter "O").

Any guesses anyone?
 
Last edited:
Hey Joe,
According to the BK setup chart....that monitor's tube uses a CR25 adapter. G0-7s, 4900, 4600, and 7000 all use a CR23 (some 7000 use a ....what 31)....so, no not compatible.

Edward
 
Back
Top Bottom