Wild Western to Elevator Action

caddysrule

New member
Joined
Dec 7, 2007
Messages
1,083
Reaction score
8
Location
Tracy, California
Does anyone have a scan of a WW to EA conversion manual? I have all of the chips from a WW to EA conversion kit. Can some one tell me where to place the roms on a EA board?
Thanks
Jeff
 
Here you go- if this isn't hi-res enough, I can send a .zip file
 

Attachments

  • ww_to_ea0001.jpg
    ww_to_ea0001.jpg
    85.5 KB · Views: 84
  • ww_to_ea0003.jpg
    ww_to_ea0003.jpg
    66.2 KB · Views: 72
  • ww_to_ea0004.jpg
    ww_to_ea0004.jpg
    99.9 KB · Views: 73
  • ww_to_ea0005.jpg
    ww_to_ea0005.jpg
    100.6 KB · Views: 61
A few more-

Of particular note is this:
9. a. Install the Black Jumper Module "26-00016-001" in socket number IC14 on the GAME board.
(this replaces the pulled IC WW16 from IC14.)

Most Taito SJ series boards don't have a socket or a chip here. There are hard-wired jumpers that connect pins in the following manner:

J1: connects pin 2 to pin 19
J2: connects pin 3 to pin 17
J3: connects pin 10 to pin 18
J4: connects pin 10 to pin 14

This socket is marked WW16 ROM3 in the WW manual.

Pin 10 is ground, so J3 and J4 put p14 and p18 to ground. Marked IN31 and IN06 in manual.

IN31 and IN06 are inputs to PROM @ IC24 (ROM5) pins 8 and 9. Always grounded via jumpers.

J1 : IN35 will follow ACOIN signal.
J2 : IN35 will follow BCOIN signal.

I'd like to have a copy of WW16 that goes in socket IC14 if possible.
 

Attachments

  • ww_to_ea0006.jpg
    ww_to_ea0006.jpg
    82 KB · Views: 42
  • ww_to_ea0007.jpg
    ww_to_ea0007.jpg
    70.1 KB · Views: 54
  • ww_to_ea0008.jpg
    ww_to_ea0008.jpg
    104.7 KB · Views: 52
  • ww_to_ea0009.jpg
    ww_to_ea0009.jpg
    106.1 KB · Views: 48
Poking around a little, I found a couple Taito board sets in the garage that have the aforementioned 'black jumper module':
 

Attachments

  • SANY1208.jpg
    SANY1208.jpg
    82.2 KB · Views: 59
  • SANY1207a.jpg
    SANY1207a.jpg
    103.6 KB · Views: 67
Thread resurrection! Does anyone have a copy of the WW16 PROM? I have a WW that I am trying to resurrect and I am missing it. Or if you have a file link and know the type of PROM, I may be able to burn it myself.

Thanks!
 
Last edited:
Back
Top Bottom