Width of a 25" monitor cab

DanoND

Active member
Joined
Jan 6, 2008
Messages
1,207
Reaction score
5
Location
Bismarck, North Dakota
Can somebody do me a solid and go measure the width of their 25" monitor cab? I have a Data East that I'm thinking of putting a 25" into and want to know if it'll fit. What's the min width I need?
 
I did 3, internal cab edges. 26", 26.5" and 27"
This is a Golden Tee Fore!, a Dynamo and some other random 25'r that I MAME'd.
 
Damn. So a standard 25" OD cab can't take a horizontal 25" monitor. Sux. Gonna have to sell this 1943 I have and track down a Dynamo or similar.
 
Damn. So a standard 25" OD cab can't take a horizontal 25" monitor. Sux. Gonna have to sell this 1943 I have and track down a Dynamo or similar.

He measured 3 internal cab edges. Measure the internal cab edges on your can and see what you come up with. I've seen 25" monitors in Centipede cabs which originally used 19" monitors mounted vertically.

I'm pretty sure your cab can take a 25" monitor.
 
Damn. So a standard 25" OD cab can't take a horizontal 25" monitor. Sux. Gonna have to sell this 1943 I have and track down a Dynamo or similar.

Might be worth investigating further... Two of my original 25" cabs now have 27" monitors in them. The Golden Tee didn't require anything but fabricating some new mounts. The Dynamo cab required a little trimming of the internals... The stringers in it interfered with the degaussing coil on the 27... It was more of a depth issue than width.
 
Back
Top Bottom