Wico parts

Grbgemen

Active member
Joined
Mar 12, 2008
Messages
1,167
Reaction score
8
Location
Lincoln, Nebraska
Took apart the wico sticks that are in my robotron cp and noticed one stick had two rubber rings inside. look like pinball rubber rings. one was on top of the grommet and the other was on the bottom. the other joystick just had smaller plastic washer, centering grommet, and the metal washer. is that the correct way?

i didn't see any rubber rings in the other wico sticks that my cocktail had.

tried looking for a diagram but i cannot find anything that shows the assembly of inside the base.
 
Took apart the wico sticks that are in my robotron cp and noticed one stick had two rubber rings inside. look like pinball rubber rings. one was on top of the grommet and the other was on the bottom. the other joystick just had smaller plastic washer, centering grommet, and the metal washer. is that the correct way?

i didn't see any rubber rings in the other wico sticks that my cocktail had.

tried looking for a diagram but i cannot find anything that shows the assembly of inside the base.

A Dig Dug manual has a nice exploded view of the wico stick.....and yes, pinball rubber inside the assembly is wrong. Your other stick is correct...plastic washer, grommet, metal washer.

Edward
 
Hit up Wu if you need parts. he has complete units minus the leafs for about $15 each
 
Back
Top Bottom