Who Sells What?

channelmanic

Well-known member

Donor 3 years: 2011-2013
Joined
Apr 5, 2008
Messages
17,110
Reaction score
1,093
Location
Texas
This thread serves as the "who sells what" list for the forum.

Nobody on this list is "authorized" or "endorsed" by the forum or the IAM. Do your research and check the feedback on anyone you wish to contact about buying parts.

Any post by members that are not listing their own products/site will be removed.
Any post by members that do not list city and state in their profile will be removed
Members with negative feedback will be removed from this list until such time that they resolve the issues.


When listing keep it to this format: A short paragraph on who you are, a list of what you sell, and any special notes.

For example:
Hi I'm John Doe and I've been selling 'x' for umpteen years. I sell:

Part category 1
Part category 2
Part category 3
etc


I ship to Country, Country, and Country. I take Payment Option A/B/C via my website.

With that said, let the posting begin!
 
ORDS,BX288/287,BXAVG,BXMHCSD,CinExor

Single Chip CPLD board replaces Atari AVG chip 137179-001
in all 6 AVG games Black Widow, Gravitar, Major Havoc, Quantum, Space Duel, Star Wars
http://www.biltronix.com/BXAVG.html

Space Duel to Major Havoc Converter board reproduction
http://www.biltronix.com/Space_Duel_to_Major_Havoc_Conversion_Board.html

Omega Race Digital Spinner (ORDS) is a new small optical encoder that replaces original pot with A/G board to improve performance, life, and accuracy.
http://www.biltronix.com/ords.html

Reproduction of Cinematronics Exorciser board. This is used in conjunction with your own signature analyzer to diagnose and repair Cinematronics CCPU boards such as Star Castle, Armor Attack, Rip Off, Space Wars. Can also be used with Vectorbeam CCPU's.
http://www.biltronix.com/cinexor.html

CPLD replacements for 16-pin BPROMs. I can make these to suit almost any 16-pin BPROM. I just need the original bin file or at minimum a printed data listing.
I started providing these primary for the Cinematronics CCPU and for Atari Battlezone, Tempest, and Red Baron.
http://www.biltronix.com/CCPU_Custom_Chip_Replacements.html
http://www.biltronix.com/battlezone_2.html

Flash type memory chips to replace 2716 EPROM. You can do these yourself if you have a programmer or I can probably do them for you.
http://www.biltronix.com/CCPU_Custom_Chip_Replacements.html#CAT28C16A

In the works is a nice new compact signature analyzer that will work with the CinExor or other setups such as Atari CAT box. It's a small fraction of the size of an HP5006A and probably cheaper and more reliable too. Not sure when I'll have these ready to go. I have several units built and running. Just fine tuning the code at this point. I don't have much time to ever work on it, that's the problem!

I just posted some new webpages on my site for a new trackball light controller called the BXTLC. It's a small add-on board that just plugs into the trackball opto-board and drives a highpower LED (supplied, you choose a color). The LED slowly fades up and down and then gets brighter and faster as the trackball moves. It's easy to plug in, there's no wiring to do, and it works on Major Havoc rollers too. You just have to mount the LED.
See here:
http://www.biltronix.com/BXTLC.html

BXTLC_2013-02-06_04_10pct.jpg
+
BXTLC_LEDs_21_06pct.jpg
=
BXTLC_Quantum_10_10pct.jpg
OR
BXTLC_in_Major_Havoc_Roller_2013-03-07_18_10pct.jpg


Thanks for looking,

William Boucher
http://www.biltronix.com
 
Last edited by a moderator:
Im Mike and I own and operate TwistyWristarcade.com Were a online store that specializes in obsolete and hard to find components for your vintage arcade machine. I offer competitive pricing and ship promptly.
Visit my store by clicking the link in my signature. As always, if you cant find what you need in the store your welcome to contact me to check on availability.
 
Hi guys Im Brandon I Offer these parts and upgrade kits and have been for the last 5 years...

Upgrade / Change Game Kits For Vegas Boardsets:
Blitz / Showtime Sportstation 3.0
Gauntlet Dark Legacy
Gauntlet Legends
War Final Assault
Tenth Degree

Upgrade / Change Game Kits For Seattle Boardsets:
Blitz 2000 Gold
Mace
Vapor TRX
Hyperdrive
BIO Freaks

Area51 and Max Force combo kit (Dual Layer Boardset only):

SF Rush 2049 SE (Upgrade from 2049 Boardset ONLY not original SF Rush)
SF Rush 2049 TE (Upgrade from 2049 Boardset ONLY not original SF Rush)

SF Rush Alcatraz Edition (Rush the Rock) (Flagstaff Boardset, original Rush)

Security Chips for all Kits above individually are 25.00 with exceptions on proto games
also
MK3 Security Chip 25.00
UMK3 Security Chip 25.00

Other Items for sale:
Naomi / Chihiro / Triforce Netboot Chip :25.00
UMK3 Juggernaut Eproms:
MK2 Challenger Eproms:


Wargods harddrive:

Outrun HS Save Kit:

Naomi Compact Flash GD-ROM Replacement drive with Net DIMM kit:
(Naomi Compact Flash Games: )

Shipping is typically 5.50 per kit(US) with a harddrive, and I ship priority mail small flat rate box or medium if more than one harddrive is purchased.


I ship just about anywhere but prepared to pay higher shipping overseas, and you must have some feedback here for me to ship to Spain , Italy or France due to several ripoffs from those countries...
Contact me for prices or visit my website at www.summittarcade.com
 
Last edited:
Rebuilt Atari ARI-ARIIs

I sell rebuilt Atari AR-ARIIs.. Usually have quite a few in stock.
ARI (asteroids and Asteroids Deluxe) ARII-Rev1,2,4,6
Don't run across any ARIIIs though.

$45 rebuilt with new caps, bottle cap resister, and anything else that needs fixing. Plus I'll reflow most of the solder joints. Shipping is $12.50 priority with tracking in the USA.

You can also ship me your AR or ARII and I'll rebuild it. Price depends on condition of pcb. Usually $10 cheaper than if I sell you one.

Trade-ins accepted depending on condition.

Check my feedback, I've sold 30 or more of these on Klov! Lots of happy collectors have Atari games with my ARs in them :)
 
Hi I'm Adam (ajcrm125) and I sell CoinUps.

These little guys give you virtual freeplay for any arcade game. The device monitors buttons of your choosing (usually P1 and P2 start buttons but doesn't have to be). When pressed it will coin up the game and then start it accordingly. Works awesome for games with no standard freeplay option.

$20 shipped to your door.
http://www.onecircuit.com/node/41

Over a hundred sold so far so feel free to ask any questions.
Thanks!
 
My name is Derrick Barnes

I did a PCB Reproduction on the Amplifone HV

Other parts have been done also
MC1, T1 Driver Transformer, Neckboards etc, and other parts are being made (see site)

www.amazingarcading.com.au

Stock qtys are listed, but more can be made up in a short time
Methods of payments
Visa, M/Card, Paypal

I live in Perth, Western Australia
 
Last edited:
My Name is Stephen Beall

I own www.ArcadeFixit.com / www.VideoGameParts.com located in Santa Maria, CA and specialize in NOS parts from the 70's, 80's, 90's and 2000's from Atari, Bally, Sega, Nintendo, Data East, Williams, Taito, Stern. I carry everything from small screws to big plastic parts. Lots of NOS artwork too!
I also sell common parts and supplies like Happ joysticks, buttons, Novus plastic cleaner, etc.
I have well over 120,000 parts in stock but not all are listed on the site. Please email with part numbers, if possible, to the address found on the site.

I ship all over the world but if you live outside the USA, we need to do an order via email or PM.

I ship same day or next via Priority Mail on most items. UPS for heavy/bulky items.

I take paypal, MC, V, Amex and Discover

I've been active in the amusement industry since age 15 (1985) and selling parts since 2006.
 
Last edited:
Williams 5114/5514/6514 NVRAM adapters

Hi, my name is Dale and I sell NVRAM adapters to replace the 5114, 5514 and 6514 CMOS SRAM chips used in early Williams video arcade games.

This adapter is intended to eliminate the problem of intermittent settings and high score loss/corruption that often occurs when using a switched mode power supply ("switcher") instead of the original linear power supply in games such as Robotron, Sinistar, Joust, Stargate, Bubbles and Splat. It also eliminates the need to use the original AA battery holder (or lithium coin cell) on the game PCB.

For more information, visit: http://sites.google.com/site/delroy666/williams-nvram

or see this thread: http://forums.arcade-museum.com/showthread.php?t=212130

They are $30 including shipping to anywhere in the U.S. or Canada.
 
I am Joe Crookham and I run Classic Arcade Works. I make CNC reproduction cabinets. I am located in Houston, TX and will ship full cabinets or individual cabinet parts. If you just have a bad spot on your cabinet this is a great option to get just the pieces you need to fix it without replacing the entire cabinet.

My website is www.classicarcadeworks.com

I use my Facebook page to keep customers updated on their cabinet production process.
http://m.facebook.com/pages/Classic...1028&refsrc=http://www.google.com/search&_rdr
 
My name is Michael Cunningham. I'm from New Jersey, an
advid arcade collector, and an active KLOV member.

I sell...
  • Reproduction arcade artwork (burgertime, multiwilliams, etc)
  • Custom game room signs - whatever you can dream up
  • Game room wall art (mainly Star wars themes)
  • Arcade related neons including custom game room neons.

I ship mainly to the USA and Canada but can ship overseas if necessary.
I take Paypal, Visa, MC, Discover, and Amex on my website

http://www.backtothearcade.com

Stop on by and check us out!
 
My Name is David (Brett) Jacquot, i'm in Risingsun OH, and i sell reproduction arcade game cabinets. I offer:

Reactor
Satan's hollow
Asteroids deluxe
Environmental Discs of Tron
Food Fight
Berserk/Frenzy
Space Duel
Baby pacman
Star castle/armor attack/war of the worlds
Missile command
Tempest
Tempest Cabaret
Crazy climber (Taito)
Mario bros widebody
Venture/pepper II
Taito standard (fronline, zookeeper, elevator action, etc)
Q*bert/mad planets
Burgertime
Dragon's lair
Centipede
Pacman
Centipede/digdug cabaret
Asteroids/lunar lander
Gauntlet I and II
Crystal castles/cloak and dagger
Warlords cocktail
Nintendo (donkey kong, popeye, etc)
Galaga
Krull
Cliff hanger
Major Havoc
Mspacman
mspacman/galaga cocktail
Robotron 2084
Atari system 1 (indiana jones/marble madness, etc)
Gravitar/black widow
Track and field
Tron
Quantum
Starwars cockpit
Joust
Joust cocktail
sega convert a cab
bagman
spyhunter cockpit
firefox upright
Rampart
 
Hi, I'm Hans, and I run Siegecraft Electronics.
http://www.siegecraft.us

Most of my product at the moment is pinball CPU testers of various types for early Williams pinball machines. I'm constantly evolving these designs based on input from customers.

I'm also expanding into EPROM adapters. I have an adapter for Firepower that combines the 3 eproms and 3 bipolar roms into a single 2764 daughterboard. Soon I'll have an adapter to use 2716 eproms in Gottlieb system 1 CPU's.

-Hans
 
Atari boards and ROM customizations/personalization

Hi, I'm Brian. I fix all kinds of boards.. especially Atari boards.

Since I fix boards I often have working boards to sell. I usually have Early 80's Atari Boards from Asteroidds up to System 1 boards.

Asteroids, Asteroids Deluxe, Tempest, Centipede, Millipede, Missile Command, Dig Dug, Crystal Castles etc.

If I sell you a board, I will also be happy to install a third party kit on it (ex. Braze Multipede kit) when you buy a board to save you the trouble of trying to install it yourself.

I also can do ROM customizations (like put "Brian's arcade" on your title/attract mode screen.
Example picture below of an Ikari Warriors one I did a few years ago

http://www.paladingrp.com/brianb/rom_hacks/pics/ikari/ikari-real-hacked2.jpg

I ship to the USA and can take paypal
if you are interested PM me
 
structured service to learn to fix arcade PCBS

If you are interested in learning repair but need a little more structured help. I offer the following service.

I am willing to fix a PCB board, then break it in 3 separate ways that are common, instructional and non-artificial (ie things you'd really expect to see and can learn from) they also will be non-overlapping breaks (ie one break won't conflict or effect you from finding the others etc) and provide you with PM assistance in finding the issues if you get stuck

This service would require you have a fluke 9010A and the required POD for the game you want to learn on and a logic probe.

I could also do a similar thing for people with an HP 10529A and a logic probe. (but no fluke)

Contact me for current pricing, which will depend on the board you want to try to fix.
 
Hi Everyone,

I sell MC6821P, the 6821 PIA manufactured by Motorola. These are used, but tested pulls. No remarks, legit Motorola date codes from the 80s to early 90s. $2-$3 each shipped depend on quantity. Msg me for more info.

Thanks!
Andrew
 
My name is Derrick Barnes

I did a PCB Reproduction on the Amplifone HV

Other parts have been done also
MC1, T1 Driver Transformer, Neckboards etc, and other parts are being made (see site)

www.amazingarcading.com.au

Stock qtys are listed, but more can be made up in a short time
Methods of payments
Visa, M/Card, Paypal

I live in Perth, Western Australia

Please upgrade this to read:
  • Repro WG6100 XY Chassis boards & parts
  • Repro Amplifone XY Chassis Boards & Parts
  • Repro LAI KZ 20"/14" XY B&W Chassis boards (Found in Australia and Europe)
  • Repro PAT9000 XY Chassis PCBs and Neck boards (13" & 19")

Thank you
 
Nintendo Playchoice-10 / Super System RP5H01 security chips

Hi,

I'm Mathijs Nilwik and I sell programmed Ricoh RP5H01 PROMs which are being used as a security chip for Nintendo Playchoice-10 or Super System games. The chips can be used for a repair of your game board or as a ROM swap. I do not program chips of the rare games like Ninja Gaiden 3, Virus (proto) or Dr. Mario (proto). I am asking 5 euro per programmed chip, all chips will be tested and labeled before shipping.

I ship from the Netherlands to Worldwide, please contact me for shipping details. Worldwide shipping of 1 chip using regular mail is 1,50 euro. I only accept Paypal for payment. For more information, please visit my website www.syf.nl

Kind regards,

Mathijs
 
Hi all my name is Matt and I make vacuum formed plastic parts. So far my shop makes midway monitor bubble protectors, lunar lander thruster covers. We are currently working on the following for future offerings:

Outrun UR dash panel
sinister cockpit CP
I, robot CP
Outrun Mini dash
ROTJ/ firefox
midway 13" monitor bezel - vertical/horizontal mount universal ( an ieure design)

More to come.

We also have Mario Bros blocks and question blocks for wall decorations. Also we can do custom vacuum forming of items and are happy to do very small runs and we work the price of the mold(s) Into a per piece price. So please do not be afraid to contact us for rare items needing reproduction such as old electomechanical items that were formed long ago.

We are also able to form some pinball ramps to restore your vintage pinball games.

Please PM me here for information, Web site is coming
 
Last edited:
Back
Top Bottom