Who repairs tron pcbs?

jumpman

New member

Donor 2012
Joined
Jun 3, 2008
Messages
841
Reaction score
7
Location
Iowa City, Iowa
I'm looking for someone who can test and repair a tron pcb. It has intermittent sound issues. The spinner acts erratic at times even after I just replaced the spinner pcb with a new repro pcb.
 
Ironically Chris "Jumper" or Klov user CDJump does.

cdjump has worked on probably 10 sets of my MCR boards and have been perfectly repaired with no issues since every single time.

Reasonably priced and A+ work-shoot him a pm
 
CDJump is pretty good..I had an issue with my board, he told me exactly what was wrong with just a screen shot, and how to fix it..
 
Check your voltage going to the spinner pcb. Bad connections in the harness are also something to check. If the voltage is low it can cause a dead or erratic spinner.
 
Check your voltage going to the spinner pcb. Bad connections in the harness are also something to check. If the voltage is low it can cause a dead or erratic spinner.

Thanks for the advice. I have my pcb out for repair. I will check voltages on the spinner.
 
Back
Top Bottom