Who does monitor repair besides Chad?

Maxstang

Active member
Joined
Apr 12, 2008
Messages
1,236
Reaction score
10
Location
California
I have a friend who needs a K7000 chassis repaired (don't know what model) and I'm out of town and can't do it. I suggested Chad but his qeue is really long. Suggestions?
 
I can do it if it's not med-res (no yoke for testing). $50 + parts + shipping...
 
What are the rates you guys charge? I use modessitt only for the K7000 stuff but I need someone who can fix Nintendo stuff and anything else reasonably...
 
I used www.adrianelectronics.com to fix a couple of Neotec 27e. I still waiting to get the second back (should be here this week), but the first one repaired worked great.
 
What are the rates you guys charge? I use modessitt only for the K7000 stuff but I need someone who can fix Nintendo stuff and anything else reasonably...

Nintendo's are my extra special especiality :p

I'll gladly take on people's Sanyo RECAPs. I won't touch anything that's been screwed up already (previously attempted) or has "deeper" issues than the following : shakiness, vertical collapse, foldover, and flag wave are all fine. If you get no power at all - keep them to yourselves - since nobody can provide me reliable IC601's (both Bob and Riptor's batches have proven to be unreliable). Sound amps are of course, no problemo, send 'em on over too.
 
Nintendo's are my extra special especiality :p

I'll gladly take on people's Sanyo RECAPs. I won't touch anything that's been screwed up already (previously attempted) or has "deeper" issues than the following : shakiness, vertical collapse, foldover, and flag wave are all fine. If you get no power at all - keep them to yourselves - since nobody can provide me reliable IC601's (both Bob and Riptor's batches have proven to be unreliable). Sound amps are of course, no problemo, send 'em on over too.

I keep having Nintendo monitors with what looks like a horizontal/vertical hold issue and Flag wave...no idea wtf it is as both monitors have the same problem and both were repaired....one is Sanyo, the other is Sharp..


I need to get a Kortek 25 repaired, also had a hold issue.....
 
i can do it if you like.

or if he want's to trade it in i have some tested ready to go.

i can do the K7000 19" medium res chassis.
i have a tube and yoke for testing.

cadillacman thanks for the props.

Peace
Buffett
 
Last edited:
I have a friend who needs a K7000 chassis repaired (don't know what model) and I'm out of town and can't do it. I suggested Chad but his qeue is really long. Suggestions?


All Good USA: http://www.allgoodusa.com

At the time I used them, they were significantly cheaper than arcadecup (that was a little over a year ago). For more detail and info see my review here:

http://forums.arcade-museum.com/showthread.php?t=144635&highlight=monitor

They were fast, friendly and professional.
 
who can repair neotec med res chassis???

Neotec has repaired two monitors for me...flat rate of $80 if I remember correctly. All I know is I shipped it out on Monday and got it back that Friday! Shipped it from OK to CA, USPS Priority Mail and they shipped it back UPS. And yes, it was the same board that I shipped out to them. I always mark my boards to see if it was swapped out or actually repaired. I have a couple of 33" WGs and a 33" Kortek I have been needing repaired for a while now, but can't seem to get excited about shipping them to Chad and spending almost $400 to get them repaired. I am going to give AllGood a try...thanks for the tip!
 
Neotec has repaired two monitors for me...flat rate of $80 if I remember correctly. All I know is I shipped it out on Monday and got it back that Friday! Shipped it from OK to CA, USPS Priority Mail and they shipped it back UPS. And yes, it was the same board that I shipped out to them. I always mark my boards to see if it was swapped out or actually repaired. I am going to give AllGood a try.

As much as I was happy with AllGood, why would you go anywhere else than Neotec? They sound lightening fast and a reasonable price. Or do they only do Neotec monitors? I want to try them!
 
As much as I was happy with AllGood, why would you go anywhere else than Neotec? They sound lightening fast and a reasonable price. Or do they only do Neotec monitors? I want to try them!

They only service Neotec monitors...they are VERY fast, speak decent "Engrish", and very friendly! :)
 
Back
Top Bottom