Which cap kit for donkey kong cocktail?

kjeffery

New member
Joined
Nov 15, 2009
Messages
4,502
Reaction score
49
Location
Walcott, Iowa
I just picked up a donkey kong cocktail that works but monitor could use some help. The colors looks like they are inverted and its kinda wavey. Is there a whole rebuild kit you can buy for these? its a 13 inch, im not sure on the model as im out of town but id like to order it now so it can be waiting for me at home
 
I just picked up a donkey kong cocktail that works but monitor could use some help. The colors looks like they are inverted and its kinda wavey. Is there a whole rebuild kit you can buy for these? its a 13 inch, im not sure on the model as im out of town but id like to order it now so it can be waiting for me at home

When you are ready to sell or trade this, contact me.
 
the sanyo 14" is a completely different beast (I have one) it has an L shaped chassis and a seperate board with the adjustment knobs.
mon36.jpg


it was used by atari and a few other companies, not by nintendo as far as I know

mon34.jpg
 
Last edited:
When in doubt, go look at Bob's cap kits. The 13/19 kit is the one to fix the problem.

The 14 cap kit will only work for the 14" that Atari used as you have stated.
 
I capped a DK cocktail before, same cap kit as a 20EZ. Plus or minus a cap or two. Made mine look brand spankin new.
 
That's one of the things I need to do to, cap my DK cocktail (including the audio board)...just not looking forward to tearing it apart to do it (plus, I've never done a cap kit).
 
You might look into doing the power supply how you are at it. I just did my soundboard looking to solve a hum issue. The video board was already done. I looked around on the forum and there is a page that has a mouser link. I think the topic had Mouser or Mouser.com within it.
 
Back
Top Bottom