Where to get Neo Geo 1-slot CPO and plexi?

cr4zymanz0r

Member
Joined
Mar 11, 2011
Messages
79
Reaction score
1
Location
Arkansas
I see various reproductions and such for all kinds of Neo Geo multi-slot stuff, but it seems like nobody does them for the single slot versions. Anybody know of a place or person that has them?
 
I never knew their was a 1slot version of the cpo... interesting this is. I wonder how different it is from the multi-slot dedicated cabs?

I ended up making my own from a high quality template....
depending on your cp dimentions shape etc it would need to be sized accordenly as one I did is sized for my cabs cp
 
I never knew their was a 1slot version of the cpo... interesting this is. I wonder how different it is from the multi-slot dedicated cabs?

I ended up making my own from a high quality template....
depending on your cp dimentions shape etc it would need to be sized accordenly as one I did is sized for my cabs cp

Just looking at the multi slot CPO pictures compared to mine, I _think_ the only difference is the 1 slot CPO doesn't doesn't have a spot/hole/lettering for 'Select Game'.
 
Just looking at the multi slot CPO pictures compared to mine, I _think_ the only difference is the 1 slot CPO doesn't doesn't have a spot/hole/lettering for 'Select Game'.

ahh, this is what I did on mine...
kinda off as I did it cheaply at old job but didn't pay for it lol

PtzkoiE.jpg


this is corrected version I made [ preview is shrunk down a bit so that could be why blue snk is off ]
wanQZNF.jpg


need to find more sharper version of snk logo but it loos so good :p
 
Last edited:
I took some pictures of the CPO and cab art. CPO has a different logo in the bottom middle too. http://imgur.com/a/2QS4Q

Hoping to somehow get replacements/repros so I can fully restore this cab.

wow, that is different and I never seen this cpo until now... if I could get my hand on a high res scan of it I could insert this into my own cpo ...
 
I could measure the dimensions after I get home. I don't have a scanner big enough to scan the thing at home. I could maybe scan it as 2 or 3 different sections then someone could 'stitch' them together, clean it up, and ideally vectorize it. I wouldn't know how to go about getting a nice reproduction even with a nice scan though.
 
I could measure the dimensions after I get home. I don't have a scanner big enough to scan the thing at home. I could maybe scan it as 2 or 3 different sections then someone could 'stitch' them together, clean it up, and ideally vectorize it. I wouldn't know how to go about getting a nice reproduction even with a nice scan though.

that's the problem, as to how good the final output will be... I started mine with a base of 300dpi and tried to get best scans/images I could find online, took long time and my 1st attempt was ok but I later redid mine.. I cant find any1 local to print mine on the good 3m stuff. I tried to contact thisoldgame to reprint while back but got no answer.....

I never tried vectorizing mine at all, mine was done inside photoshop and exported to pdf then printed... my cp isn't oem/factory original, its custom fit to my cabinet so my dimmentions are off from original
 
Back
Top Bottom