Where to find a Defender Cocktail Harness?!

zzaz3

New member
Joined
May 2, 2010
Messages
261
Reaction score
0
Location
Georgia
This is the last thing I need to get my machine running, but I can't find one online anywhere!! Apparently the Cocktail harnesses are different from the regular, so they're very hard to find.

Does anyone know where I can find one? *If not, does anyone know how I can make one myself?

Thanks.
 
*If not, does anyone know how I can make one myself?

Of course you can make one yourself. Buy a bunch of wire and the mating connectors, and assemble it as per the wiring diagram in the manual. It's not hard at all. Just really tedious.

What's wrong with your current wiring harness? Was it hacked up to convert the game? If so, it may be easier to convert it back.

-Ian
 
I have a Cocktail Defender that i am probably going to give up on, The Cabinet is a complete mess! Let me know what you need, it's complete and working.

Braido...
 
I need the entire harness. I have no wiring in my cab at all. Also, if you have something I could use to mount my board set on the side I could really use something like that.

I'll send you a PM.
 
I need the entire harness. I have no wiring in my cab at all. Also, if you have something I could use to mount my board set on the side I could really use something like that.

I'll send you a PM.

Thanks, got your PM and i have sent you a reply.

Braido...
 
Ooops... I have an upright so it may not be much help.
 
This is the last thing I need to get my machine running, but I can't find one online anywhere!! Apparently the Cocktail harnesses are different from the regular, so they're very hard to find.

Does anyone know where I can find one? *If not, does anyone know how I can make one myself?

Thanks.


Sit down with an assload of .156" molex crimp pins, an assload of .156" molex housings, and an assload of wire, a handful of .062 molex parts, and built it...

It's not magic.. just time consuming... mount the boards, figure how how and where you're going to route the wire, and do it....
 
Back
Top Bottom