What I found was the front ribbon cable was pinched and shirted at the dash cluster.
Now the problem is this seems to have taken out something on the main jamma board. I have swapped the wheel board into other games and it works fine but there is no in game feedback to the wheel when you crash or hit anything in the Exotica. I have also swapped the ribbon cable to the jamma with a known good still no luck.
Some signals seem fine as the dash readout is now correct just no jerks in the wheel for collisions.
The wheel tests fine in test mode moving left and right.
Am I correct in saying there should be feedback for crashes, like in california speed, off road thunder etc?
Any ideas or any chance of a schematic of the jamma board anywhere?
Thanks