Whats the cheapest place to buy a control shelf decorative overlay for Ms Pacman?

Deathbyillusion

New member
Joined
Jan 6, 2011
Messages
19
Reaction score
1
Location
Bountiful, California
Whats the cheapest place to buy a control shelf decorative overlay for Ms Pacman?

I have a Ms Pacman Machine and when I bought it a while back it did not come with a control shelf decorative overlay. I first I had forgotten it normally has one on there and then saw online some pics of one and then remembered it had one. Now its just been sitting here and I keep wantig to get one and just have been putting it off. I would like to know somewhere online I can buy the cheapest one thats a reliable site, that prints good quality & the quality of the decal is good quality. There is alo some spots where the paint has been warn since its not a sticker. is there some where or some how I can get it touched up or is it better to leave it untouched for more value. I mean at this point I dont plan on selling it.

Thanks
 
Last edited:
Sand down and repaint control panel before installing new cpo

Sand it Down? Its already painted back or something it thats what was underneath it and is smooth and doesnt have any bumps. The only think you can see is next to the screws is part of the decal which can be taken off after I take the screw off. Of do you me the actual cabinet to sand that first then repaint it?
 
you asked if you could touch up the control panel where it is worn. Normally you sand and paint a control panel before you install a new control panel overlay.
 
You could go extreme and have it professionally sand blasted and powdercoated. ;)
 
Ok let me post some pics but I meant on my actual cabinet on the side artwork its a little worn next to the edge of the cabinet where people would normally put their hands and there is spots that are missing paint from like chipped or scratched and was wondering if I should get that touched up or if its better to leave it and keep it original. I didnt mean my control panel was worn but as for the control panel overlay I was asking the place that makes the best quality Ill take pics of both and show you.


Update: Here is the pics the first one shows the control panel. The second one shows part of the decal/sticker left from the original under the screws. Thats the only remails everything else is gone., The thrid one shows the edge of the cabinet where its warn and scratches/chips or whatever. The fourth one shows a closer look of the scratches ect.
 

Attachments

  • Control Panel.jpg
    Control Panel.jpg
    31.9 KB · Views: 45
  • Control Panel Leftover.jpg
    Control Panel Leftover.jpg
    35.2 KB · Views: 38
  • Side Cabinet Artwork.jpg
    Side Cabinet Artwork.jpg
    49.1 KB · Views: 39
  • Side Cabinet Artwork Closeup.jpg
    Side Cabinet Artwork Closeup.jpg
    56 KB · Views: 36
Last edited:
So he sez, the artwork is a little worn and he was wondering if he should leave it and keep it original.

So I sez, It's not original... The artwork is worn. :D

Darren Harris
Staten Island, New York.
 
Yeah, that control panel looks pretty good - no need to worry about repainting it before installing the new overlay.

I would, however, remove the strike clip bolts and those last few remaining pieces of sticker before you install the new overlay.

Vicshaf is your best bet for a good price.

Unless you want one super cheap - I can get you one for $10.
 
So he sez, the artwork is a little worn and he was wondering if he should leave it and keep it original.

So I sez, It's not original... The artwork is worn. :D

Darren Harris
Staten Island, New York.

Wait so this isnt original paint on the cabinet? I didnt know how can you tell?
 
Last edited:
Back
Top Bottom