infinkc New member VAPS Joined Mar 1, 2011 Messages 64 Reaction score 0 Location Elk Grove, California Dec 31, 2011 #1 I have a bunch of these broken on a Moppet PCA that im trying to repair, have no schematics for this board at all that i can find.
I have a bunch of these broken on a Moppet PCA that im trying to repair, have no schematics for this board at all that i can find.
timiskander Well-known member Donor 3 years: 2011-2012, 2017 VAPS Joined May 3, 2006 Messages 2,667 Reaction score 61 Location Fayetteville, New York Dec 31, 2011 #2 From http://www.gamesforum.ca/showthread.php?t=481845 "The Z is a tolerance marking. It means it is a 20% part. Very common for a cap, and you can use a 10% or most any other tolerance as well for this application. " .1uF bypass cap 50v $0.06/ea http://www.mouser.com/ProductDetail...=sGAEpiMZZMuAYrNc52CMZIXN3rpbAC0aUPONVg09eRc=
From http://www.gamesforum.ca/showthread.php?t=481845 "The Z is a tolerance marking. It means it is a 20% part. Very common for a cap, and you can use a 10% or most any other tolerance as well for this application. " .1uF bypass cap 50v $0.06/ea http://www.mouser.com/ProductDetail...=sGAEpiMZZMuAYrNc52CMZIXN3rpbAC0aUPONVg09eRc=