What should the next wiring Harness be?

The decisions have been made. Sorry Frizz it is not going to be Pole Position.

The first one up is going to be...

Nintendo (DK Series) Control Panel harness. Which covers the DK series and more. I will have to check the scats to see what else these will work in, as I really do not know yet.
  1. DK
  2. DKjr
  3. DK3
  4. Super Mario?
  5. Popeye?
  6. Radar Scope?
How does $15 shipped sound?

Moon Patrol will also be made next. I do not have the cost estimates done for Moon Patrol yet.

I am still taking custom harness requests via pm for the games that I have parts and or templates for already.
 
So the DK/DK Jr. CP harnesses came in 2 versions, one version was two harnesses w/small connectors, the other version was the big molex. Which will you be making?

And then to complicate matters, DK3 kit came with two adapter harnesses that adapted an edge connector to the split small connectors from the CP.
 
Last edited:
So the DK/DK Jr. CP harnesses came in 2 versions, one version was two harnesses w/small connectors, the other version was the big molex. Which will you be making?

Pics will be posted of the prototype in a day or so. They will be with the two small connectors.
 
Since you've already done a bunch of Williams harnesses, I'd really like to see a harness for VARKON ! I could provide schematics should you need them.

I'm currently rebuilding one and would really love to have a complete working harness. I could test one for you !! =)

Thanks for providing these valuable products to the hobbiest !

Steve Winslow
 
I may have to pick up a harness from you. Mine is the one with the two small connectors and it looks like the cp I have had the connectors removed. It's going to be easier to set it up using molex.
 

I do remember looking at this when I first started making Williams harness'.

I've been making these for years... so has Alex Yeckley.

...and Bob Roberts has been making them even longer. I find it interesting that no one has thought to use Molex connectors with Trifurcon pins knowing the common problems associated with IDC connectors.

Complete backbox wiring for a Bally Skateball. So I can rewire it all back to original :)

Not going to even look into pins until summertime.

I may have to pick up a harness from you. Mine is the one with the two small connectors and it looks like the cp I have had the connectors removed. It's going to be easier to set it up using molex.

Here is the list thread... http://forums.arcade-museum.com/showthread.php?t=103541
 
Back
Top Bottom