chris25810
Well-known member
I'm bouncing back and forth between 3 restos right now, death race, journey and freshening up a timber
What Project Are You Working On ?
- Thread starter ScumBum
- Start date
tobyocc
Well-known member
Finished re-assembly of over/under coin doors after paint and dry. Sanding down cabinet after filling 100 holes from "Compton" lock down bars (This was just a joke). Now I just need to figure out what I am going to make this cab into. Sent CP for welding and beading. All plexi been sent out to be cut. Will do more work this weekend time for a beer now.
Toby
Toby
- Joined
- Aug 3, 2009
- Messages
- 5,152
- Reaction score
- 534
Currently working on a SF2 WW cab partial restoration.
Did the monitor last week and some other random stuff. I need to work on the CP next.
I am weighing out a patch and paint job before new T-molding.
I really need to order the side art posters also.
Need to:
figure out the Sharp monitor on my PC10 (bar on the side)
Donkey Kong Monitor is on the fritz. (should shoot a picture of it)
Need to put the Mario Bro WB back together then start on a full restoration.
My Defender Jrok can wait... I was restoring a couple of Wico Leaf joysticks for it with some NOS parts from a microswitched donor joystick... getting parts ready long term for that Defender MW.
Did the monitor last week and some other random stuff. I need to work on the CP next.
I am weighing out a patch and paint job before new T-molding.
I really need to order the side art posters also.
Need to:
figure out the Sharp monitor on my PC10 (bar on the side)
Donkey Kong Monitor is on the fritz. (should shoot a picture of it)
Need to put the Mario Bro WB back together then start on a full restoration.
My Defender Jrok can wait... I was restoring a couple of Wico Leaf joysticks for it with some NOS parts from a microswitched donor joystick... getting parts ready long term for that Defender MW.
Attachments
_jmfr
Well-known member
Rebuilding a corner on my Time Pilot. Bondo is a love hate relationship
Restoring the Control panels on my BurgerTime, Track & Field, and Pac-man.
- Joined
- Feb 22, 2008
- Messages
- 8,889
- Reaction score
- 529
Last edited:
I am currently working on my Berzerk. My hope is to get the monitor working first and then the ZPU.
MikeyDee
Active member
Frontline
Asteroids monitor
Asteroids monitor
Spy Hunter... I am having an issue with the 12v lighting and static/popping... then I have to decide if I touch up the current "white" areas and go with Pr0k's side art for the graphic area or do I say screw it and sand the bitch down and go with full side art on both sides.
I have a NVRAM to install for high score saves and I just took delivery on FREEPLAY ROM's to install. I also have a new pot coming from Mouser any day now (for the accelerator).
I have a NVRAM to install for high score saves and I just took delivery on FREEPLAY ROM's to install. I also have a new pot coming from Mouser any day now (for the accelerator).
ChompingQuarters
Well-known member
Wasn't planing on doing any. However, two just arrived last Wednesday from Rich and currently we are detailing a Mouse Trap and hope to move onto Asteroids soon.
http://www.chompingquarters.com/2010/01/two-new-classics-arrive-to-the-arcade
http://www.chompingquarters.com/2010/01/two-new-classics-arrive-to-the-arcade
Last edited:
MilitiaMan
Well-known member
It seems I always have more than one project going at a time, so here goes ...
1. Currently installing a switcher and JAMMA harness into my Robotron cabinet to make it a Multi Williams. Also need to take this Joust CP I have and drill the holes for the MW layout.
2. Just picked up a QIX project cabinet (complete except for the monitor) ... need to throw a monitor in there and test the boards. Then it needs a good cleaning and the base needs to be rebuilt.
3. Ghosts N Goblins - Finally found a dedicated cabinet (thanks to nacashvalue), but it needs a little cosmetic work. Right now, I am in the process of sourcing a NOS bezel and sideart for it.
All three projects are going at once, which is probably why I rarely finish anything.
Steve
MM
1. Currently installing a switcher and JAMMA harness into my Robotron cabinet to make it a Multi Williams. Also need to take this Joust CP I have and drill the holes for the MW layout.
2. Just picked up a QIX project cabinet (complete except for the monitor) ... need to throw a monitor in there and test the boards. Then it needs a good cleaning and the base needs to be rebuilt.
3. Ghosts N Goblins - Finally found a dedicated cabinet (thanks to nacashvalue), but it needs a little cosmetic work. Right now, I am in the process of sourcing a NOS bezel and sideart for it.
All three projects are going at once, which is probably why I rarely finish anything.
Steve
MM
MilitiaMan
Well-known member
My current project is getting my APB Marquee to work.
After that, I'm going to restore my SPO.
After that, I'm going to restore my SPO.
bit_slicer
New member
(boards,boards,boards)
* Standalone ER-2055 tester. Just for grins.
* More tech pages for the future website.
* Standalone ER-2055 tester. Just for grins.
* More tech pages for the future website.
was working on my new tron. put on a new cpo, painted the coin door, front of the cab, fixed some water damage, and some monitor adjustments. all done now.
Burt6666
Well-known member
Still working on my Phoenix pin.
Phetishboy
Well-known member
I am busy knit-picking and ultimately ruining my Berzerk. It started as a simple restoration, but has become the bane of my existence. This will be the first cab where I am going to have to just leave well enough alone and settle for less than perfect. It didn't seem to bother Stern, so I am going to stop letting it bother me.
OP
OP
ScumBum
Well-known member
Its coming along pretty good , thanks again for the CP ! It should be done hopefully in a month or two . I keep working on other stuff and getting side tracked .
Project??!?? Projects are like potato chips, you can't have just one.
Let's see, when not at the paying job, I am currently:
- rebuilding some Williams power supplies for Caddysrule
- revamping my test bench, I'll be adding a pinball ps hookup in a few days
- finishing the Galaga48n1 (just need to finish the marquee light and swap in a recapped 4600 chassis)
- finish recapping the 5 or 6 chassis sitting on the floor in my office
- working on installing the boards and power supply in the Joust cocktail.
- restoring the Defender control panel and stripping the last of the green latex paint off the Defender cab.
and about a dozen other things that don't come to mind at the moment.
Did I mention that I am the poster child for AADD (Adult Attention Deficit Disorder).
ken
Let's see, when not at the paying job, I am currently:
- rebuilding some Williams power supplies for Caddysrule
- revamping my test bench, I'll be adding a pinball ps hookup in a few days
- finishing the Galaga48n1 (just need to finish the marquee light and swap in a recapped 4600 chassis)
- finish recapping the 5 or 6 chassis sitting on the floor in my office
- working on installing the boards and power supply in the Joust cocktail.
- restoring the Defender control panel and stripping the last of the green latex paint off the Defender cab.
and about a dozen other things that don't come to mind at the moment.
Did I mention that I am the poster child for AADD (Adult Attention Deficit Disorder)
.ken
