what chassis is this?

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
this is in a spy hunter I just picked up. The frame has all the g07 stickers in it.
 

Attachments

  • spyhunterchassispics 001.jpg
    spyhunterchassispics 001.jpg
    88 KB · Views: 38
  • spyhunterchassispics 002.jpg
    spyhunterchassispics 002.jpg
    87.4 KB · Views: 36
  • spyhunterchassispics 003.jpg
    spyhunterchassispics 003.jpg
    87.2 KB · Views: 32
  • spyhunterchassispics 004.jpg
    spyhunterchassispics 004.jpg
    89.1 KB · Views: 41
  • spyhunterchassispics 005.jpg
    spyhunterchassispics 005.jpg
    89.1 KB · Views: 29
Last edited:
because I couldn't seem to ID it from bob's page, I kind of thought it was.

assuming this used to have a g07 (which I need to prove still) I should be able to go in and swap it right back out huh?

I won't jump the gun on doing that quite yet though.
 
the difference between mine and yours is i dont have a remote board. i did take mine off a go7 tube capped it and it works. it worked befor but the colors were really bad smearing and what not. the cap kit fixed that but i am having brightness issues. also the color transisters on the neck board break easy i had to jumper all of them back togather.

Peace
Buffett
 
OK, I just gotta ask. What does a SH look like with a Wei Ya chassis?

SH is a finicky game with monitors; just curious.
 
Looks like an Eygo replacement chassis to me. Eygo made replacements for most of the "classic" era monitors.....G0-7, 4900, 7000, etc. The yoke plug in your picture is not from an Electrohome. I'm betting that's a 7000 or 4900 replacement. Is there still a sticker on the yoke with it's number? Without a yoke number, it's gonna be difficult to say what it was with 100% certainty.

Edward
 

that 2nd pic appears to be the exact chassis I have in there currently. Like elutz said, the yoke plug looks different.

I guess I would be wondering if all of their "replacement" chassis looked the same.
for example, looking at a k4900 or a g07 replacement c hassis would be very easy or next to impossible to distinguish between them?

Or, I guess what I am getting at is, is this obviously a g07 replacment chassis?

the more I read through, I would expect the yoke plug to look different, because they require you to cut or break it, to fit this chassis.

thanks Ken
 
Last edited:
The colors are good on this. It seems like it needs to be degaussed a touch, maybe that's the issue that people get, I haven't degaussed it yet.

Let's say I pull this and sell it.

1. Would anyone want it? lol
2. what should it sell for?

chassis only
 
Back
Top Bottom