what chassis is it .. i need cap kit for it.. bob or zanen has it?

wmacmonagle

Active member

Donor 2012
Joined
Jul 6, 2010
Messages
2,059
Reaction score
10
Location
Rosamond, California
what chassis is it .. i need cap kit for it.. bob or zanen has it?

i tried to figure what chassis model is it.. wondered where can i find the cap kit.. bob or zanen has it ?..

thanks..
 

Attachments

  • photo 1.jpg
    photo 1.jpg
    45.7 KB · Views: 60
  • photo 2.jpg
    photo 2.jpg
    34.3 KB · Views: 51
  • photo 3.JPG
    photo 3.JPG
    91 KB · Views: 35
There should be some 'P' numbers on the board. What do they read? Also, there is a white sticker behind the brown cap in your second pic, what does it read?
 
That looks a lot like a U2000. In which case, where is that GIF...

Ah. There it is:
kill-it-with-fire-300x176.jpg



Could also be a 7400, they're very similar. Assuming here that it's standard resolution, otherwise you might be dealing with the even worse U5000. Post the numbers on the board so we can be sure.

-Ian
 
on the neckboard i found P719..

it s hard for me to see the stickers unless i take chassis out and i shoot the picture with flash and i got somme info of that white stickers beside the brown cap

???2574-U4GR60L or something like that it s hard to read lol
 
OTHER Chassis to ID.. two of em..

one from Super off road 25 inch

(photo 1 and 2)

one from Noahs Ark 13 inch

Photos 3,4,5
 

Attachments

  • photo 1.jpg
    photo 1.jpg
    42.8 KB · Views: 20
  • photo 2.jpg
    photo 2.jpg
    34.1 KB · Views: 16
  • photo 3.jpg
    photo 3.jpg
    41.7 KB · Views: 18
  • photo 4.jpg
    photo 4.jpg
    39.8 KB · Views: 17
  • photo 5.jpg
    photo 5.jpg
    44.7 KB · Views: 15
The 13" is a 4700. It's nearly identical to the 4600 except the neckboard is different.

Get a capkit for the K4600 for that one and you should be good.
 
Not a 4500. K4500 is a completely different chassis, delta gun tube. Used in Galaxian and a few others.

-Ian

The 13" is a 4700. It's nearly identical to the 4600 except the neckboard is different.

Get a capkit for the K4600 for that one and you should be good.


Yup, you guys are right. I always forget WG failed to follow their normal numbering sequence on these...
 
If ordering from Bob:

K4700 13" color $5.00
K7400/K7500 High Temp Cap Kit Alternate Kit$11.00



If ordering from Zanen, get kit 201a for the 4600. I don't see a 7400 kit on their page.

Contact info for Zanen:

Zanen Electronics
46 Parklane Dr.
Ransom Canyon, TX 79366
Phone: 888.449.2636
 
probably a flyback or 2 as well , no? (k7000,k7400)

may as well be proactive.
 
Yeah, brush the dust off the flybacks of the k7xxx and the k74xx. If either of them have any cracks anywhere in the plastic (especially around the focus and screen knobs) then buy the flybacks too. Best to change them before they smoke.

The 4700 (AKA 4600) flys almost never go bad, so no need there.
 
Yes i ordered everythignn from bob.. he has everythig i need for now.

> 1 G07-FBO 13" Repair Kit - $28.00
> 2x Sanyo EZ 20 Cap Kits - $10.00
> 1x WG7400 Cap Kit - $11.00
> 1x WG7000 Repair Kit - $28.00
> 1x WG4700 cap Kit - $5.00*
USPS Priority - $12.00 FRB
Total - $94.00

*The K4700 flyback was so rock solid that no replacements have ever been
made.

thanks man


GO7 FBO and WG4700 is for my two moppets!!!!

WG7400- Pacgal 20 yrs
WG7000- SOR

and of course sanyos are for nintendo cabs! =)


probably a flyback or 2 as well , no? (k7000,k7400)

may as well be proactive.
 
Back
Top Bottom