what causes green tint on wg monitors

discgolfer72

New member
Joined
Dec 9, 2008
Messages
1,425
Reaction score
4
Location
overland park, Kansas
i have a wg 25 inch monitor and for some reason it has a green tint i can see all colors
red blue green but no matter how much i try and adjust it there is a green tint on the screen (whites are always green )

is this an ishue with the guns /yoke or is it a problem with the neckboard transitors /pots
 
It could be either, the green gun could be shorted causing it to be full on or the driver could be causing it. A rejuvenator can identify a shorted gun or you could start replacing parts in the green drive circuit.
 
i have a wg 25 inch monitor and for some reason it has a green tint i can see all colors
red blue green but no matter how much i try and adjust it there is a green tint on the screen (whites are always green )

is this an ishue with the guns /yoke or is it a problem with the neckboard transitors /pots

The monitor could very well need to be rejuvenated. I also have a WG K7100 that has the same problem you're having, and it's been confirmed to be the tube. If this is the case and it does need to be rejuvenated, you may be better off buying a new monitor all together.
 
yea im kinda pissed traded 4 project monitors for this and now im scrwed the project monitors i traded at least had good tubes and one only needed a horz width coil
 
you could try rapidly tapping on the end os the tube in the gun area with a screwdriver handle(out tube face doen on a pillow)

be careful not to break the tube, but some folks here have has success doing the old tap method...

i prefer using my rejuve but when i have a tube the rejuve wont work on i revert back to the taparoo method
 
Back
Top Bottom