What brand/style/size Connector did Atari Use

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,928
Reaction score
9,391
Location
Avon, Minnesota
For the extra AC terminal on their transformer blocks? The one front and center of this pic:

DSC01025.jpg


I wanna tie my marquee light here but all I know is that the connector has 3 pins and the housing has a point at one end. I am sure this is common knowledge to you repair guys, but when I looked through 3 different Atari parts lists for the transformer blocks, the on-board connectors aren't listed for some reason (but the terminal screws are?).
 
Looks like a Molex SD-1396-R to me. Molex P/N 03-09-1031.
0.093" pins, panel mount, receptacle.
 
Last edited:
So I need the mating connector to plug into this one. Would I need to include the 'panel mount' part?

The "panel mount" refers to the "ears" on it that let it snap into the hole in the metal.
No, you don't need those for the mating connector.
The Molex P/N for for that plug would be 03-09-2032.
 
The "panel mount" refers to the "ears" on it that let it snap into the hole in the metal.
No, you don't need those for the mating connector.
The Molex P/N for for that plug would be 03-09-2032.

Thank you Darren. *runs to Bob's site to see if he carries these*
 
This is how he has it listed:

.093 Plug & receptacle 3 position w pins & sockets $1.25

And then his pic for the 3 position plug matches what I'd need:

molexcons.jpg


Cool.
 
Back
Top Bottom