WGM3331 screen shakes

MrSinister

Well-known member

Donor 9 years: 2015-2022, 2024
Joined
Dec 30, 2008
Messages
1,785
Reaction score
114
Location
Pittsburgh, Pennsylvania
First off..I dont have alot of experience with monitors so this is a learning experience. I have a WGM3331-U0TS59G that shakes while its cold. After about 20- 30 min the screen settles down but its still there just alot less. So I checked bob roberts site and it looks like the chassis is a u3000? but im not sure.

I went over the remote board and it didnt change. The flyback isnt leaking. Picture wise its great. Not sure where to look next.
 
Last edited:
Ok I reseated all the connectors and found a connector that is burnt and cracked. The wires to it are red and blue in color and goes to the neck board. After reseating I turned it on and it seems that all the shaking is gone.

Should I replace the connector or just leave it the way it is because it doesnt seem to be a problem right now???
 

Attachments

  • 2010-05-21 15.49.45.jpg
    2010-05-21 15.49.45.jpg
    93 KB · Views: 11
  • 2010-05-21 15.53.49.jpg
    2010-05-21 15.53.49.jpg
    98.3 KB · Views: 6
Back
Top Bottom