WGK7184 Chassis Questions

nerdygrrl

Well-known member
Joined
Dec 24, 2010
Messages
3,365
Reaction score
551
Location
Portland, Maine
I looked through some old threads that referenced this chassis, unfortunately many of the images have expired.

From my understanding there is a typical WG chassis which can use standard K7000 parts and a Zenith version which cannot.

This looks like a standard WG chassis to me, but before I dump $50 of parts into it I wanted to verify.

I also was hoping for some direction as to what to do with the black box, which from my understanding aids in the discharging of the tube. How would I install a typical K7000 flyback onto this, if it is indeed a WG chassis?
 

Attachments

  • unnamed-3.jpg
    unnamed-3.jpg
    45.2 KB · Views: 7
  • unnamed-4.jpg
    unnamed-4.jpg
    78.5 KB · Views: 15
  • unnamed-5.jpg
    unnamed-5.jpg
    83.9 KB · Views: 16
  • unnamed-7.jpg
    unnamed-7.jpg
    68.6 KB · Views: 12
Standard k7000 parts will work (not a zenith model). The normal k7000 replacement flyback works on this chassis, the extra black'doubler' block will be removed with the old flyback.
 
I think I was a bit take back by the chassis because of its appearance. Is there any major difference between this and the later models, aside from the card?
 
Last edited:
none. just your run of the mill K7000. I have about 5 of these at work each with a different card.

what exactly is wrong with it?
 
Back
Top Bottom