WGK6100 and Electrohome G08 same connecotrs?

pacray

Well-known member
Joined
Apr 21, 2007
Messages
2,361
Reaction score
113
Location
Erie, Colorado
WGK6100 and Electrohome G08 swappable?

Is it easy to swap a G08 with a 6100? And are the connectors the same, or does it require some modification?
 
Last edited:
You can swap tubes which also means you have to swap yokes and reconverge. So if your goal is to have a tube with less burn in you're golden. If your goal is to swap the whole thing as mentioned above not gonna happen.
 
It is NOT possible to make that swap regardless of connectors. Many have tried... none have succeeded...

I put a Wells K6400 in a dedicated Star Trek once. Granted I also had to install an Atari trasnformer and a fan on the monitor but it worked for about 3 years without a single issue.

To the OP - the connectors were totally different. It was not a drop in replacement but I had about 20 K6400's and no GO8's that worked so I gave it a shot.

Matt
 
I put a Wells K6400 in a dedicated Star Trek once. Granted I also had to install an Atari trasnformer and a fan on the monitor but it worked for about 3 years without a single issue.

To the OP - the connectors were totally different. It was not a drop in replacement but I had about 20 K6400's and no GO8's that worked so I gave it a shot.

Matt

Bet you wish you had those 20 K6400 now! :)

Edward
 
Back
Top Bottom