WG6100 neckboard pots

They look like this style...

twv.jpg
 
If your talking about the bias pots, they are that style, but are 15k Ohm single turn. I had a heck of a time finding that value. I noticed Bob doesn't have that value in his selection.
 
I ended up using pots from my local electronics shop. 15k is not available (here) so I used 25k, this works because one side of the pots is always to ground.

I "copied" the ohms values from the original pots to the new one's. Works fine. I needed to bend the outer two legs a hair to fit them in the holes, but nothing major.
 
Back
Top Bottom