Wg4900 missing solder neckboard

Jschwan

New member
Joined
Sep 9, 2016
Messages
112
Reaction score
1
Location
IDAHO FALLS, Idaho
I have a wg4900 series monitor that has a few spots missing solder on the neckboard. Is this normal or a mistake from the factory? One spot is a header pin that is unused and there are two more on the piece that the pins go into (not sure of the name).
 

Attachments

  • 20160929_171831.jpg
    20160929_171831.jpg
    202.3 KB · Views: 23
Those traces don't look like they're going anywhere. I may be wrong but your good I think. If the monitor works don't question it.
 
Yeah it works. I was mistaken in my last post and thought this was a g07 at first, but this is the one on that stargate that has the ghosting. Picture is great other than that though
 
Those traces don't look like they're going anywhere. I may be wrong but your good I think. If the monitor works don't question it.

you are correct the 4900 doesn't have any solder there. N/C
 
Good to know. Getting ready to do a good reflow and cap kit as soon as it arrives (forgot to complete my order yesterday), and on't need any oh crap moments haha. Thanks again for all your help guys. This forum and your help have been invaluable lately.
 
Back
Top Bottom