WG25K7000 picture sizing

RetroInjection

Well-known member
Joined
Dec 6, 2010
Messages
4,175
Reaction score
594
Location
Sayre, Pennsylvania
I just installed a new WG25K7000 and am having trouble sizing the picture. Horizontal and vertical size are not to the edges of the screen. Have adjusted horizontal and vertical position and hold. Have also adjusted vertical size. Does anyone know how to fix this issue? Thanks.

Dave
 
It's a WG25K7000. I don't know what a P538 is. Here is a pic. The right side of the image looks a bit squished.
 

Attachments

  • DSC03390.jpg
    DSC03390.jpg
    92.7 KB · Views: 40
there's no horizontal size adjustment on the remote board/adjustments, you have to adjust that at the width coil, if I'm guessing that's what you're saying.

if you're unable to move the picture any farther to the right, that's a whole other monster. I can't remember if the K7000 had the Left/Center/Right jumpers. mod would know though.
 
there's no horizontal size adjustment on the remote board/adjustments, you have to adjust that at the width coil, if I'm guessing that's what you're saying.

if you're unable to move the picture any farther to the right, that's a whole other monster. I can't remember if the K7000 had the Left/Center/Right jumpers. mod would know though.

Yes they do, back by the yoke connector.

I want to verify it is a P538 before I offer further advice. No sense chasing the wrong thing...
 
Okay, does yours have the remote board or does it have all the pots on the chassis?
 
Sell me your extra k7500, please :)

Sure, I should mention that the vert. position pot on the remote board is broke. I also have an Electrohome G07CBO if you are interested. Not sure if it works. You can Paypal me at [email protected] with whatever you think is fair for board(s) and shipping. Thanks.

Dave
 

Attachments

  • DSC03400.jpg
    DSC03400.jpg
    101.1 KB · Views: 6
Last edited:
Back
Top Bottom