WG PD279200 CAP KIT List

wmacmonagle

Active member

Donor 2012
Joined
Jul 6, 2010
Messages
2,059
Reaction score
10
Location
Rosamond, California
I tried to find the model for this monitor and noticed there is serial on the chassis PD279200. I checked online and seem this is WG D9201.. NOT SURE>.


I tried to find Cap kit list and hardly to find anywhere and though maybe KLOV can help me. Wondered if anybody here has same monitor that they could help me.

Issue here is WAVY like FLAG!!!!! Obviously it need a cap kit. I spoke one of klov recently and said I may need to look at each cap and list em up then buy indvidiually from anywhere.

Any 2 cents would be appreciated.

Thanks
 
spoke to bob roberts and he s sending me cap kit

"> 1 D9200 cap kit per manual - $10.00"

let s see if this covers everythign I need.

Thanks thos
 
spoke to bob roberts and he s sending me cap kit

"> 1 D9200 cap kit per manual - $10.00"

let s see if this covers everythign I need.

Thanks thos

It won't have all the caps. Even the kit you can buy from WG doesn't include all the caps.

If you had been a little more patient, I could have told you where to find the list here. All you have to do is search 'D9200 cap list' and you would have found it on the 3rd result:

http://forums.arcade-museum.com/showpost.php?p=1131876&postcount=4
 
Bobs WG kit only has like 10-12 of the major caps. The full kit is around 54 or something.

Zanen sells the full kit... which also isn't full... as it misses about 3 or 4 caps.
 
Just got the new Zanen Electronics list of capkits.

Kit # 260 Wells-Gardner D9200 capkit, contains 64 capacitors, $9.95

Phone: 1-888-44-ZANEN or (806) 829-2780

Fax: (806) 829-2781
 
Also try removing the signal cable from the Video Sync Interface board
see if the colored blocks look good on the screen that is normal if no input signal.
Do the colored R,B,G blocks look good?
If so inspect the video interface board for bad connections to the input headers
on the board,if use vga solder those pins too.
Check the OSD see how it looks with signal cable hooked up?
If you can take a picture of the problem.
 
Back
Top Bottom