WG K7000 issues

ZxBIGTIMExZ

Member
Joined
Mar 20, 2010
Messages
326
Reaction score
0
Location
Fremont, California
Hello everyone and thanks in advance for taking your time to read my post. I recently picked up a Dynamo cab with 25" WG K7000. After a lot of fiddling with the pots and flyback I got the picture to come up. I must say it looks fantastic. The only problem is it takes 10 to 15 minutes to warm up. The picture does come on initially but its verry dark and kind of fuzzy like its out of focus and then like magic 10 to 15 min later it brightens right up looking like it just rolled out of the factory. I did a bsic cap kit on it and nothing changed. I really dont want to spend $90 on a new chassis so any help would be greatly appreciated.


Thanks,
Dan
 
Last edited:
Thankyou

Thanks for the help guys. Uppon further inspection I did find a substancial crack above the focus knob on the flyback so I'l be sending another money order to our good friend Bob. I will post my results once the flyback has been chaged. Once again I am very gratefull for the help.
 
Back
Top Bottom