WG K4951 Help Needed

2Vizslas

Active member
Joined
Jun 30, 2016
Messages
287
Reaction score
129
Location
CANNON FALLS, Minnesota
I have a WG K4951 in my Qbert. I have a friend who works on monitors tell me one of two things are bad. The flyback or the neck board socket. There is a loud buzzing coming from the neck board. The monitor was just fully capped. I read that it is rare that the flyback goes bad very often. Can you repair a neck board socket? I thought I would start there. Is there a replacement socket I can use or buy? I think you can buy the flyback. Any suggestions?
Thanks
 
Back
Top Bottom