WG D9200 - Picture brightness shifts with horizontal position

terrorinstinct

New member
Joined
Jun 17, 2025
Messages
27
Reaction score
12
Had a D9200 with that EEPROM glitch where the picture seems to disappear. Sub brightness had reset to 33. Quick trip into factory OSD fixed that, but I discovered something strange when I was calibrating the rest of the display. If I set horizontal position to be greater than 92, the picture from the input gets dimmer while the OSD gets brighter until the actual input signal is gone and the OSD is suffering color bleed from overbrightness. I already have a cap kit on order but I've never seen this kind of issue before so I'd like to confirm whether this is a "feature" or a sign of something else going that will need to be taken care of.
 

Attachments

  • IMG_20250829_104005550.jpg
    IMG_20250829_104005550.jpg
    353.2 KB · Views: 3
  • IMG_20250829_104013242.jpg
    IMG_20250829_104013242.jpg
    312.8 KB · Views: 2
  • IMG_20250829_104033280.jpg
    IMG_20250829_104033280.jpg
    183.3 KB · Views: 3
  • IMG_20250829_104056820.jpg
    IMG_20250829_104056820.jpg
    64.4 KB · Views: 3
Back
Top Bottom