WG Blowing fuses

mike11

Active member
Joined
Mar 7, 2012
Messages
1,617
Reaction score
9
Location
Pennsylvania
I have a WG chassis from an arcade that instantly pops the fuse. I rebuilt the while chassis all caps and both transistors and it still does it........

Any advise is appreciated
Thanks
 
Did you happen to read the sticky on k7000s? Or research monitor repair?
Also, what model WG chassis?

Could be:
Flyback
Hot
Bad solder joints

Also helps if you test your B+
 
Make sure you are using an isolation transformer with it.

Check the voltage regulator, rectifying diodes, and HOT...
 
Not familiar with the setup of the iso trans wiring .... Can you enlighten me on that ???
Thanks
 
Back
Top Bottom