WG 7191 - what to buy?

devillocke

New member
Joined
Dec 13, 2009
Messages
28
Reaction score
0
Location
North Carolina
I have what I believe is a 25 inch WG k7000 series monitor in my Simpsons game.

Is there a simple list of capacitors, and other parts I should buy to fix this thing up? Maybe a kit with all the parts I need. It is working, but the top left corner is obviously discolored, and sometimes I see a vertical line in a couple places. Otherwise it works ok. I just want to make it last as long as possible.
 
get the big cap, 560 uf 200 v which doesnt come with the bob roberts cap kit...

just reflow any cold solder joints where you find 'em.
 
Save yourself time and hassle and just buy the complete rebuild kit from Bob Roberts, just make sure it is a 7191 (or other K7000) first. This will help with the vertical line.

http://www.therealbobroberts.net/k7000.gif

However, the discoloration in the corner is most likely a degauss problem. You may need to run a manual degaussing tool over the tube to clear it up.
 
also ensure before you buy a deluxe kit , that the k7000 chassis you have is NOT zenith made , no flyback available , yes WG made some of their own 7000 series chassis , but zenith made a ton for them as well , short of flyback they are pretty much identical boards
 
Back
Top Bottom