WG 6100 Problem no HV?

Tombo

Administrator
Staff member

Donor 2011
Joined
Oct 31, 2003
Messages
10,995
Reaction score
1,940
Location
Northern, California
1. Monitor comes up when game is cold
3. after about 5 minutes, image is gone like the monitor is dead
3. Has neck glow when image goes out
4. When it does work (in the first 5 mins), the I barely hear any chatter
5. Spot Killer is not on when Image goes away
6. Since the monitor is in the machine, I cant tell if there is static on the tube face.

Thanks in advance for any and all help.

-Tom
 
What is your B+ measuring when it's out? Measure it where the orange wire connects to the neckboard from the HV cage....
 
Check the B+ like Mod said. Also, if you have the latest revision of the HV PCB, there is an over-voltage protection circuit. A LED in the HV cage should light up if you have the later PCB (P329) and it is actually tripping. If that LED is on, you need to adjust the HV and Over-voltage protection circuit per the manuals instructions.
 
Back
Top Bottom