WG 4906 - Ghosting is this a convergence issue or capkit?

msignor

Member
Joined
Sep 1, 2011
Messages
567
Reaction score
4
Location
Sparta, New Jersey
WG 4906 - Ghosting is this a convergence issue or capkit?

So I have this monitor from a mspac. Never been capped so I do know it needs it.... however, is the blurryness / ghosting maybe the rings all out of whack?

I have personally never seen something this bad.. original owner said it was doing it since they have had it and just dealt with it...

Any ideas?

Thanks!

Matt
 

Attachments

  • IMG_20120802_184736.jpg
    IMG_20120802_184736.jpg
    89.7 KB · Views: 27
  • IMG_20120802_184730.jpg
    IMG_20120802_184730.jpg
    95.9 KB · Views: 32
At first glance it looks like a convergence issue, but you've got blue on both the cyan dots and the blue shadow underneath them. I'm not too sure about this one.
 
Last edited:
Looks like convergence rings out of adjustment. However, I have also seen similar symptoms when tube needs rejuvenation.
 
Soo... Can anyone reccomend a good tutorial on not killing myself when adjusting the rings? I mean that... lol, This would be a first for me.

I tried to locate the factory "markings" on the rings to see if it was something obvious, but couldn't tell with the monitor in the game.. figured before I go through the hassle of taking it out, I mind as well just adjust em anyway.

Also, any way for me to tell if the tube needs a rejuve before I go too far?
 
Soo... Can anyone reccomend a good tutorial on not killing myself when adjusting the rings? I mean that... lol, This would be a first for me.

I tried to locate the factory "markings" on the rings to see if it was something obvious, but couldn't tell with the monitor in the game.. figured before I go through the hassle of taking it out, I mind as well just adjust em anyway.

Also, any way for me to tell if the tube needs a rejuve before I go too far?

http://www.arcaderepairtips.com/2010/08/25/adjusting-the-convergence-rings/
 
Back
Top Bottom